BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Intermittent electrical gremlin Empty Intermittent electrical gremlin Sun Mar 20, 2016 1:03 am

Rockman

avatar
Life time member
Life time member
I suspect the ignition switch with this one but before I pull it apart I thought I'd ask for other suggestions;
-first time: started and cut out again almost straight away on the Snowys trip. It would crank over but no go. I turned the kill switch off and on, no effect. Then the ignition switch off and on. Started immediately, hasnt done it again since.
-second time: friday this week. Clock missing segments. I stopped, did some stuff, then restarted. Clock came good.
-third time: yesterday and this morning. No clock at all. Went for a ride. Restarted, clock is now all good.

So the question. Is this the ignition switch starting to play up, or a bad connection in the instruments, or something else? Its not serious yet, but is starting to develop. 

88K100RT

    

2Back to top Go down   Intermittent electrical gremlin Empty Re: Intermittent electrical gremlin Sun Mar 20, 2016 2:38 am

Rick G

Rick G
admin
admin
Sure sounds like the ignition switch Phil but the clock probably needs cleaning as well. You can get the LCD of the circuit board 4 small screws I think then clean the contact surface with a soft white pencil eraser on the LCD and circuit board then replace it. It will probably work well again for another 30 years.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

3Back to top Go down   Intermittent electrical gremlin Empty Re: Intermittent electrical gremlin Sun Mar 20, 2016 6:21 pm

Rockman

avatar
Life time member
Life time member
RicK G wrote:Sure sounds like the ignition switch Phil but the clock probably needs cleaning as well. You can get the LCD of the circuit board 4 small screws I think then clean the contact surface with a soft white pencil eraser on the LCD and circuit board then replace it. It will probably work well again for another 30 years.
Thanks Rick. I'll start there and see what happens.

    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum