BMW K bikes (Bricks)

You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down    Again K1200 rear wheel on early K100 on Sat Mar 26, 2016 2:31 pm

PiotrK100

avatar
active member
active member
Hi There
Since couple of days I'm trying to get to any conclusion regarding the rear wheel change for K1200. MY new/old brick is from 1983 so with monolever fited. Browsing few forums I got confused beacuse there is no definitivly described what is possible and what not.
On one post I read that 5 inch wheel and tire 160/... (instead of 5,5 inch and 170/....) will need only two small (2-3mm) spacers to fit the wheel. Than I see other post where someone says thatYES it is possible but with a huge modification.
So my post here is to clarify the situation by someone who did it with success.

http://www.xenum.pl
    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum