BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Siezed ABS sensor Empty Siezed ABS sensor Wed May 25, 2016 4:57 pm

88

88
Life time member
Life time member
Having real trouble getting the ABS sensor out of the fork leg on the K1100rs. The sensor is in poor shape from previous mishandling and so I am regarding it as a gonner and will replace it but right now I just want it out for removing the forsk to do the seals. 

Any tips on getting it free without damaging the fork?


__________________________________________________
Siezed ABS sensor Ir-log1188....May contain nuts!Siezed ABS sensor Ir-log11

"The world is a book and those who do not travel read only one page." - St. Augustine from 1600 years ago & still true!

K1 - 1989 - AKA Titan (unique K1/K1100RS hybrid by Andreas Esterhammer)
K1100RS - 1995. AKA Rudolf Von Schmurf (in a million bits)
K100RS - 1991 AKA Ronnie. Cafe racer project bike
K75RTP - 1994
K75C - 1991 AKA Jim Beam. In boxes. 
K1100LT 1992 - AKA Big Red (gone)
K100LT - 1988 - AKA the Bullion brick. Should never have sold it.
    

2Back to top Go down   Siezed ABS sensor Empty Re: Siezed ABS sensor Wed May 25, 2016 6:42 pm

Dai

Dai
Life time member
Life time member
BFH used carefully Very Happy


__________________________________________________
1983 K100 naked upgraded to K100LT spec after spending time as an RS and an RT
1987 K100RT
Others...
1978 Moto Guzzi 850-T3, 1979 Moto Guzzi 850-T3 California,1993 Moto Guzzi 1100ie California
2020 Royal Enfield Bullet 500
    

3Back to top Go down   Siezed ABS sensor Empty Re: Siezed ABS sensor Wed May 25, 2016 10:10 pm

duck

duck
Life time member
Life time member
Heat with small torch.

Small Vise-Grips.

Or pound a Torx bit into it.

When you put the new one in use anti-seize.


__________________________________________________
Current stable:
86 Custom K100 (standard fairing, K75 Belly pan, Ceramic chromed engine covers, paralever)
K75 Frankenbrick (Paralever, K11 front end, hybrid ABS, K1100RS fairing, radial tires)
86 K75C Turbo w/ paralever
94 K1100RS
93 K1100LT
91 K1
93 K75S (K11 front end)
91 K75S (K1 front end)
14 Yamaha WR250R
98 Taxi Cab K1200RS
14 K1600GT
http://www.ClassicKBikes.com
    

4Back to top Go down   Siezed ABS sensor Empty Re: Siezed ABS sensor Thu May 26, 2016 3:12 am

Rick G

Rick G
admin
admin
Unplug it and leave it there. If it doesn't work then use the RBFSH and hit it very gently.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

5Back to top Go down   Siezed ABS sensor Empty Re: Siezed ABS sensor Thu May 26, 2016 4:45 am

Ringfad

Ringfad
Life time member
Life time member
Hi Will

If all else fails you could always cut the wire, one of my bikes had this done to it by a PO and it was then re-connected


__________________________________________________
Siezed ABS sensor Ir-log10

   ;BMW; K100RS Style Black 1987 105K Km     ;BMW; K1 Black 1993 60K Km     ;BMW;  K1100RS Black 1996       ;BMW; K1 Blue 1990 25K Miles
    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum