BMW K bikes (Bricks)

You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Hello from Darwin Empty Hello from Darwin on Thu Jun 30, 2016 4:12 pm

schmik

schmik
New member
New member
Hi there everyone. There is a lot of such valuable information here!

A friend has bought a brick and as his background is in MX, wants to put some big handle bar raisers and turn it into what would best be described as within the scrambler genre. 

I was suggesting that he install the BEP2.0 from maru-labs for simplicity. 

He is looking for two x 2-1 exhaust joints and aiming for a dual muffler system up the left read of the bike. 

Everything else will be simple and neat.

Any early advice will be helpful and thanks for all the information given here so far!

Michael

    

2Back to top Go down   Hello from Darwin Empty Re: Hello from Darwin on Fri Jul 01, 2016 3:07 am

Dai

Dai
Life time member
Life time member
Hello from Darwin 177912 I'm not sure if anyone has done a 4-into-2 system but it should be possible.


__________________________________________________
'83 K100 upgraded to K100RS spec
Others...
'78 Moto Guzzi 850-T3, '79 Moto Guzzi 850-T3 California,'93 Moto Guzzi 1100ie California,
'03 Suzuki Blandit GSF600SK3 (NFS any more because wifey has claimed it)
    

3Back to top Go down   Hello from Darwin Empty Re: Hello from Darwin on Fri Jul 01, 2016 2:38 pm

blaKey

avatar
Life time member
Life time member
G'day Michael and welcome to the forum.

"I'm not sure if anyone has done a 4-into-2 system but it should be possible."

Here's one that was prepared earlier...

Hello from Darwin K100_t10


__________________________________________________
Neil
K100RS 1986 RED!

Dress for the ride and the potential slide.
    

4Back to top Go down   Hello from Darwin Empty Re: Hello from Darwin on Fri Jul 01, 2016 5:41 pm

charlie99

charlie99
VIP
VIP
welcome Michael

a bit of welding and some pipe bending should get you going ...but the sizes are a little small for normal stuff at 28mm (round abouts )

34 od mm should be found easier

good luck with it ...and keep us posted to the outcome


__________________________________________________
cheezy grin whilst riding, kinda bloke ....oh the joy !!!! ...... ( brick aviator )

'86 K100 RT..#0090401 ..."Gerty" ( Gertrude Von Clickandshift ) --------O%OHello from Darwin Au-log10

'86 k100 rs.. #######..  "Fred " (f(rame) red ) ( Fredrick leichtundschnell ) - -
bits and pieces from many kind friends across the k100 world ...with many thanks ..
    

5Back to top Go down   Hello from Darwin Empty Re: Hello from Darwin on Fri Jul 01, 2016 6:40 pm

92KK 84WW Olaf

92KK 84WW Olaf
Life time member
Life time member
@blaKey wrote:G'day Michael and welcome to the forum.

"I'm not sure if anyone has done a 4-into-2 system but it should be possible."

Here's one that was prepared earlier...

Hello from Darwin K100_t10

Does look good with 2 pipes......


__________________________________________________
1992 K100LT 0193214 Bertha Alaska Blue 101,000 miles
1984 K100RT 0022575 Brutus Baja Red 578 bought 36,000 now 89,150 miles
1997 K1100LT 0188024 Wotan Mystic Red 689 58,645 now 100,380 miles
1983 K100RS 0011171 Fricka 606 29,495 miles Damn K Pox Its a Bat outta Hell No 33,600 miles
    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum