BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down    K100 K75 Clutch Housing/Carrier on Fri Jul 22, 2016 7:57 pm

Tom FR

avatar
Life time member
Life time member
G'day all Forumers. A stupid question from someone less knowledgeable. Are the clutch housings/carriers for the K100 and the K75 interchangeable?. As far as I can see, the main difference between the two (according to Clymer pictures) is that the 100 carrier has three holes and the 75 has none. I suppose because there are no holes in the 75 carrier, they tell you to use a special tooltohold the carrier so the 30mm nut can be removed.Thank you all in advance. Any info much appreciated. Cheers Tom


__________________________________________________
1993 K75 Slightly Modified
2010 BMW F650GS Twin
1992 R100R
    

2Back to top Go down    Re: K100 K75 Clutch Housing/Carrier on Fri Jul 22, 2016 9:06 pm

RicK G

avatar
VIP
VIP
No the K75 clutch is small in diameter. When compared they are very different due to the K75 having a counter ballance on the secondary shaft.


__________________________________________________
If everything seems under control then you aint goin fast enough:- Mario Andretti
Bikes 1986 K100RT, 1993 K1100 LT, 1994 K1100 LT, 1993 K75 RT, 1996 K75RT, 1986 K75 GS, 1979 Z1300 Kawasaki X 2 & 1976 SR 500 Yamaha for now
    

3Back to top Go down    K100 K75 Clutch Housing/Carrier on Fri Jul 22, 2016 11:54 pm

Tom FR

avatar
Life time member
Life time member
Thanks for that Rick. I'll keep you posted.


__________________________________________________
1993 K75 Slightly Modified
2010 BMW F650GS Twin
1992 R100R
    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum