BMW K bikes (Bricks)

You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Clutch centering tool Empty Clutch centering tool on Sun May 23, 2010 9:16 am

Crazy Frog

Crazy Frog
admin
admin
Here is the blueprint to make your own clutch centering tool.

Clutch centering tool Clutch11

Clutch centering tool Gear110


__________________________________________________
Clutch centering tool Frog15Clutch centering tool Logo2101986 k75, 1985 K100rt, 1985 K100rt/EML sidecar.
    

2Back to top Go down   Clutch centering tool Empty Re: Clutch centering tool on Sun Apr 10, 2011 8:20 am

Crazy Frog

Crazy Frog
admin
admin
Here is another solution sent by Michel Berland (from a French BMW forum).
He's using a 7/16 deep socket and had drilled the driver (square hole) to accommodate the passage of the push rod.

Clutch centering tool Tool110

Clutch centering tool Tool210


__________________________________________________
Clutch centering tool Frog15Clutch centering tool Logo2101986 k75, 1985 K100rt, 1985 K100rt/EML sidecar.
    

3Back to top Go down   Clutch centering tool Empty Re: Clutch centering tool on Sun Apr 10, 2011 8:23 am

Crazy Frog

Crazy Frog
admin
admin
Here is the cheap Papermate solution:

Clutch centering tool Gear_510


__________________________________________________
Clutch centering tool Frog15Clutch centering tool Logo2101986 k75, 1985 K100rt, 1985 K100rt/EML sidecar.
    

4Back to top Go down   Clutch centering tool Empty Re: Clutch centering tool on Sun Apr 10, 2011 2:27 pm

Oldgoat

Oldgoat
Life time member
Life time member
Great ideas! Thanks for posting this Bert. Cool

OG

    

5Back to top Go down   Clutch centering tool Empty Re: Clutch centering tool on Mon Apr 11, 2011 6:17 am

BIG D

BIG D
Life time member
Life time member
Cool

Thanks Bert,

I used the top drawing and had one machined up at workshops out of Brass worked a treat when I changed the clutch.

BIG D

    

6Back to top Go down   Clutch centering tool Empty Re: Clutch centering tool on Tue Mar 12, 2013 2:34 pm

Shep

Shep
Silver member
Silver member
In the H___ Workshop Manual I found the following differences:


The 18 mm diameter is 11 mm in length not 12 mm


The next beveled section is 9 mm in length not 10 mm


The 7 mm diameter is
6 mm in length not 5 mm


The final 6 mm diameter is 31 mm not 30 mm


The total insertion length remains the same. Was this done
out of poetic license and so as to not annoy the H group?


Thanks


Shep

    

7Back to top Go down   Clutch centering tool Empty Re: Clutch centering tool on Tue Mar 12, 2013 3:55 pm

japuentes

japuentes
Life time member
Life time member
Hi, I prefer the Paper Mate solution, is cheaper, multitasking (use it to mark parts) and result is the same.
Best regards
JAP


__________________________________________________
Clutch centering tool 2854237993 1988 K100RS SE/ABS
    

8Back to top Go down   Clutch centering tool Empty Nice! on Wed Mar 13, 2013 6:38 pm

joao.c130

joao.c130
active member
active member
Good post, this is good tool!

    

9Back to top Go down   Clutch centering tool Empty Re: Clutch centering tool on Wed Mar 13, 2013 7:13 pm

Crazy Frog

Crazy Frog
admin
admin
@Shep wrote:In the H___ Workshop Manual I found the following differences:

The 18 mm diameter is 11 mm in length not 12 mm

The next beveled section is 9 mm in length not 10 mm

The 7 mm diameter is
6 mm in length not 5 mm

The final 6 mm diameter is 31 mm not 30 mm

The total insertion length remains the same. Was this done
out of poetic license and so as to not annoy the H group?
Thanks

Shep

I am using the tool as described on the first post for the last 15 years and never experienced any problem.
The taper size is to ease the insertion of the tool affraid and the length is not important (.....).

CF


__________________________________________________
Clutch centering tool Frog15Clutch centering tool Logo2101986 k75, 1985 K100rt, 1985 K100rt/EML sidecar.
    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum