BMW K bikes (Bricks)

You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Starter button bypass  Empty Starter button bypass on Tue Dec 27, 2016 6:49 am

cliverocky

cliverocky
active member
active member
Going to install a temporary starter button on the RS until my replacement turns up.

How do you pull the wires out of the terminal block (male side)?

    

2Back to top Go down   Starter button bypass  Empty Re: Starter button bypass on Tue Dec 27, 2016 7:57 am

Dai

Dai
Life time member
Life time member
You either need the correct tool or a piece of tube that fits EXACTLY over the pin. That will compress the locking ears at the back and allow you to pull the pin out.


__________________________________________________
'83 K100 upgraded to K100RS spec
Others...
'78 Moto Guzzi 850-T3, '79 Moto Guzzi 850-T3 California,'93 Moto Guzzi 1100ie California,
'03 Suzuki Blandit GSF600SK3 (NFS any more because wifey has claimed it)
    

3Back to top Go down   Starter button bypass  Empty Re: Starter button bypass on Wed Dec 28, 2016 12:41 am

Holister

Holister
Life time member
Life time member
I think it might be possible to install a temp starter bypass between the starter relay control coil and one of the fuses. That would be a lot easier. Someone with a wiring diagram might be able to confirm that and give the correct connections. I'm on-the-road atm and don't have anything like that with me.


__________________________________________________
1988 K100RT     VIN No.  0094680
1989 K100RT     VIN No.  0097367 (naked)  
1996 K1100RS   VIN No.  0451808
 Starter button bypass  Austra12    Fuel:  95 Octane
Engine Oil: Nulon Full Synthetic 15W50
Gear Box Oil:  Nulon Synthetic 75W90
    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum