BMW K bikes (Bricks)

You are not connected. Please login or register

Go to page : Previous  1, 2

View previous topic View next topic Go down  Message [Page 2 of 2]


51Back to top Go down    Re: Force fan to stay on or add a switch? on Wed Jul 12, 2017 2:55 pm

SniperX


Silver member
Silver member
What color is the wire off the relay is the switch connected to?

    

52Back to top Go down    Re: Force fan to stay on or add a switch? on Wed Jul 12, 2017 4:34 pm

Laitch

avatar
Life time member
Life time member
SniperX wrote:What color is the wire off the relay is the switch connected to?
The wire from the temperature sensor to the component labeled temperature switching unit in the diagram in Rob's post #48 is violet/green in my schematic. Is that a color combo you're seeing at both the sensor and switching unit?


__________________________________________________
1995 K75T 60,000 miles
    

53Back to top Go down    Re: Force fan to stay on or add a switch? on Wed Jul 12, 2017 6:28 pm

Dai

avatar
Life time member
Life time member
Alternatively you can just put 12 volts across the violet/yellow wire. I picked up the green wire at the back of the ignition switch and fed that through a switch to the violet/yellow wire. I also put a warning light from violet/yellow to earth to tell me when the override switch was on.


__________________________________________________
'83 K100 upgraded to K100RS spec
Others...
'78 Moto Guzzi 850-T3, '79 Moto Guzzi 850-T3 California,'93 Moto Guzzi 1100ie California,
'03 Suzuki Blandit GSF600SK3 (NFS any more because wifey has claimed it)
    

View previous topic View next topic Back to top  Message [Page 2 of 2]

Go to page : Previous  1, 2

Permissions in this forum:
You cannot reply to topics in this forum