BMW K bikes (Bricks)

You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


Beamer

avatar
Silver member
Silver member
Hi,

I am trying to remove the plate behind the Hall sensor plate ( the one with the timing marks on it ) and my 3rd party manual seems to skip that detail.

There is a large bolt holding it in place and I would guess it's on a taper. Having removed the bold I tired a bit of tapping but it was not coming off the taper.

Is there some trick or tool that needs to be inserted? What is the proper way to remove this.

Thanks.

    

Laitch

avatar
Life time member
Life time member
Can you post a photo?


__________________________________________________
1995 K75T 68,000 miles
    

Crazy Frog

avatar
admin
admin
Which plate? #1 or #4?


__________________________________________________
1986 k75, 1985 K100rt, 1985 K100rt/EML sidecar.
    

Inge K.

avatar
VIP
VIP
@Beamer wrote:There is a large bolt holding it in place and I would guess it's on a taper.

No need to remove the M10 bolt, ....that is for the camshaftchain sprocket.

The small plate is secured with three M4 screws (which also secures the hall
sensor rotor) ....it's a thight fit (and maybe some corrosion) and can be
stubborn to remove.....try to heat it a bit with a hot air gun.


__________________________________________________
Inge K.
K100RS -86. (first owner), K1100LTSE -94.
    

Beamer

avatar
Silver member
Silver member
OK, now I have a clearer idea of the parts, I'll have another look.

Thanks for the replies.

    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum