BMW K bikes (Bricks)

You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down    How to remove a Pushrod oil seal in a K1 on Wed Aug 09, 2017 12:55 pm

Trapper

avatar
Silver member
Silver member

Anyone know how the pushrod seal is removed in a K1? Something tells me it's not held in by the circlip as that appears to be holding in the bearing behind it. Could the seal just be seated into the core of the bearing???

Thanks


__________________________________________________
K1 Red & Yellow 1990 64.000 miles & BMW K1 Red & Yellow 1991 14.500 Kms



    

Inge K.

avatar
VIP
VIP
The seal is pressed into the shaft, use a slide hammer with a expandable collet or a hook.


__________________________________________________
Inge K.
K100RS -86. (first owner), K1100LTSE -94.
    

Trapper

avatar
Silver member
Silver member
Excellent advice - thank you so much.

Trapper


__________________________________________________
K1 Red & Yellow 1990 64.000 miles & BMW K1 Red & Yellow 1991 14.500 Kms



    

blaKey

avatar
Life time member
Life time member
Onya Inge! Very Happy


__________________________________________________
Neil
K100RS 1986 RED!

Dress for the ride and the potential slide.
    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum