BMW K bikes (Bricks)

You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Wanted  Empty Wanted on Sun Jul 04, 2010 8:42 am

tunza60

tunza60
Silver member
Silver member
Anyone have K75C handlebars lying around..i wanna sit up a bit on my RS.
Cheers,
Tony

    

2Back to top Go down   Wanted  Empty Re: Wanted on Sun Jul 04, 2010 10:24 pm

Guest

avatar
Guest
Try ringing these blokes in North Coburg/Melbourne on
0393504417. Remember cable length might need changing accordingly.

I used a simple set of 22mm diametre 'risers' that shift the stock 'bars up and back about 30mm, and the previous owner had a set of bar 'extenders' made that allow me to shift the controls out further. It works a dream and is easier than changing the 'bars altogether. You do have to work out a way to reattach the handlebar pad but mine's just riveted to a simple metal strap.

I'll snap a picture and post it later on...

    

3Back to top Go down   Wanted  Empty Re: Wanted on Mon Jul 05, 2010 7:53 am

tunza60

tunza60
Silver member
Silver member
have sent an email. if i get no reply soon i'll ring em. Just went and had a look at a 86 RT..mmm.very tempting.

    

4Back to top Go down   Wanted  Empty Re: Wanted on Tue Jul 06, 2010 2:26 am

Guest

avatar
Guest
I have sent them (BM Wreckers) emails in the past and not ever received a response, so I just ring now. Some businesses truly haven't got the personnel or simply don't realise yet that the internet is a good place to gain and also to lose customers. Good luck there.

    

5Back to top Go down   Wanted  Empty Re: Wanted on Tue Jul 06, 2010 11:58 am

ssray

avatar
active member
active member
I fitted these to my k100rs, The cables and the brake hose were all ok (with a little -easing!) the only awkward bit was the throttle assembly I did not remove any cables etc and it was a pain in the ass.
The bars are probably coming off soon so its a shame you`re not nearer.
Ray



Last edited by ssray on Tue Jul 06, 2010 11:59 am; edited 1 time in total (Reason for editing : I cant spel)

    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum