BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Key Switch connector ID Empty Key Switch connector ID Fri Jun 22, 2018 5:02 pm

D'Ecosse

D'Ecosse
active member
active member
Can anyone ID the type of connector used on the Key-Switch? A Source even? 

Key Switch connector ID K100_m10

    

2Back to top Go down   Key Switch connector ID Empty Re: Key Switch connector ID Fri Jun 22, 2018 5:08 pm

Dai

Dai
Life time member
Life time member
Cut them off and replace with Molex or similar. You don't have to use OEM connectors.


__________________________________________________
1983 K100 naked upgraded to K100LT spec after spending time as an RS and an RT
1987 K100RT
Others...
1978 Moto Guzzi 850-T3, 1979 Moto Guzzi 850-T3 California,1993 Moto Guzzi 1100ie California
2020 Royal Enfield Bullet 500
    

3Back to top Go down   Key Switch connector ID Empty Re: Key Switch connector ID Fri Jun 22, 2018 5:23 pm

D'Ecosse

D'Ecosse
active member
active member
I recognize that is an option

If I was going to cut it off, would use something better than Molex  Laughing

    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum