BMW K bikes (Bricks)

You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down    Complete ABS Removal on Sun Jun 24, 2018 9:24 am

@kustom_moto

avatar
Silver member
Silver member
Guys I have Just bought another K as a Cafe Racer style project, I want to totally remove the front and rear ABS, including taking as much out of the loom as possible. I have searched on here but cannot seem to find the info I need, if anyone can help me out I would be very grateful, the new one is a 1988 LT Model.

Paul


__________________________________________________
1988 K100 LT
1984 K100 RS

Instagram K100 Build follow me at: @kustom_moto
    

2Back to top Go down    Re: Complete ABS Removal on Sun Jun 24, 2018 11:29 am

duck

avatar
Life time member
Life time member
The ABS wiring is all separate so you should be able to remove just about all of it.


__________________________________________________
Current stable:
86 Custom K100 (standard fairing, K75 Belly pan, Ceramic chromed engine covers, paralever)
K75 Frankenbrick (Paralever, K11 front end, hybrid ABS, K1100RS fairing, radial tires)
86 K75C Turbo w/ paralever
94 K1100RS
93 K1100LT (x2)
91 K1
93 K75S (K11 front end)
91 K75S (K1 front end)
14 Yamaha WR250R
http://www.ClassicKBikes.com
    

3Back to top Go down    Re: Complete ABS Removal on Sun Jun 24, 2018 5:31 pm

Two Wheels Better

avatar
Moderator
Moderator
As Duck says, I was able to unplug and remove 90% of the non-functioning ABS wiring loom from a K1100LT harness. Some of it involved cutting out the unnecessary pieces and taping/heatshrinking them off. Saves a bundle of weight, too!


__________________________________________________
1987 K100RS, '93 K11/K12 hybrid 'Big Block', '09 K1300GT, '07 K1200R, '04 R1150RT, '95 R100 Mystic, '77 R75/7.
Have we accomplished half of what we dreamt we would? There may still be time.
    

4Back to top Go down    Re: Complete ABS Removal on Mon Jun 25, 2018 3:46 am

@kustom_moto

avatar
Silver member
Silver member
Great thanks guys. There is the control unit (I presume that I what it is called!) right at the back of the bike which is fed from the harness right at the front....what I want to do is to cut that out completely, is it a case of cutting the wires and heat shrinking over or would I need to join anything together?


__________________________________________________
1988 K100 LT
1984 K100 RS

Instagram K100 Build follow me at: @kustom_moto
    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum