BMW K bikes (Bricks)

You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down    Throttle Body Vacuum Variation on Fri Sep 28, 2018 3:36 am

Bunyak100

Bunyak100
active member
active member
i have measured the 4 throttle baby vacuums and compared and I find that #2 is wY higher than the rest and seem to be unable to adjust screws to sync, I have checked with a spray of engine start and also propane, check the rubbber as best I can.
Any ideas please
I have also just complete a valve clearance check and all are ok

    

2Back to top Go down    Re: Throttle Body Vacuum Variation on Sun Sep 30, 2018 5:30 am

Point-Seven-five

Point-Seven-five
Life time member
Life time member
The passage the air screw controls is probably blocked. Try removing the screw and shooting carb cleaner in there.


__________________________________________________
Present:
1994 K75RT
1991 K100RS

Past:
1994 BMW K75S
1992 BMW K100RS
1982 Honda FT500
1979 Honda XR185
1977 Honda XL125
1974 Honda XL125
1972 OSSA Pioneer 250
1968 Kawasaki 175
    

3Back to top Go down    Re: Throttle Body Vacuum Variation on Sun Sep 30, 2018 8:01 am

charlie99

charlie99
VIP
VIP
or a pipe cleaner soaked in carb cleaner, through them all

but the feed passage to the valve could be blocked as .75 suggests


__________________________________________________
cheezy grin whilst riding, kinda bloke ....oh the joy !!!! ...... ( brick aviator )

'86 K100 RT..#0090401 ..."Gerty" ( Gertrude Von Clickandshift ) --------O%O
    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum