BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Centre stand bushes Empty Centre stand bushes Mon Oct 08, 2018 2:48 am

Tesla13BMW

Tesla13BMW
Silver member
Silver member
Am rebuilding a k1100 the centre stand to fit on my 87k100.  On disassembly there was only a circlip on the left hand side centre stand bush.

This is also all that is shown on RealOEM fiche and I question why there is not one on both sides when the bush and bolts are the same part numbers.

I can only assume the right hand side bush gets bottomed out and the left hand side is "taken up" to the depth the circlip will allow????

Cheers, Chris.


__________________________________________________
Brisbane, Australia.  '86 K100RS
    

2Back to top Go down   Centre stand bushes Empty Re: Centre stand bushes Mon Oct 08, 2018 3:27 am

charlie99

charlie99
VIP
VIP
no they just bust out and go missing

seen that a few times

likely to do with the stretch of the centre stand as it is lifted ,
you would think that they might put a spreader bar near the top to stop that stretch happening .


__________________________________________________
cheezy grin whilst riding, kinda bloke ....oh the joy !!!! ...... ( brick aviator )

'86 K100 RT..#0090401 ..."Gerty" ( Gertrude Von Clickandshift ) --------O%O
'86 k100 rs.. #######..  "Fred " (f(rame) red ) ( Fredrick leichtundschnell ) - -
bits and pieces from many kind friends across the k100 world ...with many thanks ..
1987 k100rs ########   "Red"  - (red sports rs TWB style )
1989 K100rt #009637   "Black Betty"  (naked rt ala Nigel , now sporting an rs main fairing )
    

3Back to top Go down   Centre stand bushes Empty Re: Centre stand bushes Mon Oct 08, 2018 5:08 am

MartinW

MartinW
Life time member
Life time member
While your at it fit grease nipples to both stands if not already fitted.

Regards Martin.


__________________________________________________
1992 K75s
    

4Back to top Go down   Centre stand bushes Empty Re: Centre stand bushes Mon Oct 08, 2018 11:59 am

duck

duck
Life time member
Life time member
MartinW wrote:While your at it fit grease nipples to both stands if not already fitted.

Regards Martin.

All K1100s came with those from the factory.


__________________________________________________
Current stable:
86 Custom K100 (standard fairing, K75 Belly pan, Ceramic chromed engine covers, paralever)
K75 Frankenbrick (Paralever, K11 front end, hybrid ABS, K1100RS fairing, radial tires)
86 K75C Turbo w/ paralever
94 K1100RS
93 K1100LT
91 K1
93 K75S (K11 front end)
91 K75S (K1 front end)
14 Yamaha WR250R
98 Taxi Cab K1200RS
14 K1600GT
http://www.ClassicKBikes.com
    

5Back to top Go down   Centre stand bushes Empty Re: Centre stand bushes Mon Oct 08, 2018 2:17 pm

MartinW

MartinW
Life time member
Life time member
Centre stand bushes 112350 Thanks Duck I had to fit mine and a mates 4V K100 had the holes no nipples and no plugs. Strange things happen to Bricks over the years, so it's worthwhile checking that they are still there.
Regards Martin.


__________________________________________________
1992 K75s
    

6Back to top Go down   Centre stand bushes Empty Re: Centre stand bushes Mon Oct 08, 2018 7:23 pm

Tesla13BMW

Tesla13BMW
Silver member
Silver member
The centre stand has grease nipples, and there is one on a bush on the sidestand bolt, but, not the bush in the centre of the sidestand.  I think the outer bush is what actuates the centre stand switch, but, I wont be using this switch.


__________________________________________________
Brisbane, Australia.  '86 K100RS
    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum