BMW K bikes (Bricks)

You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


Matthew-Brisbane

Matthew-Brisbane
Life time member
Life time member
Hello All 

I have been having trouble with trying to get my rear main seal  / output shaft seal to stop leaking 

I believe that it may have something to do with the stop disk/ thrust washer  and how it passes through the seal   

Item number  10  








[b][b]11 21 1 460 873[/b][/b] STOP DISK - 1MM
or 







[b][b] 11 21 1 461 813[/b][/b] STOP DISK - 1,25MM
Is this item required  ? 
 
Stop Disk,Thrust washer behind the clutch basket  K100 only  Img_1610
Stop Disk,Thrust washer behind the clutch basket  K100 only  D5430d10

    

Laitch

Laitch
Life time member
Life time member
Matthew Brisbane wrote:Item number 10. Is this item required?
A K100 like yours has one; the K75 doesn't have one. I suggest you keep it in the assembly. If it's damaged, measure its thickness and replace it with an OEM washer/stop disk of the same thickness.

What is that a strand of material visible in the lower part of the second image?



Last edited by Laitch on Tue Feb 26, 2019 6:17 am; edited 5 times in total (Reason for editing : Improved artistic rendering)


__________________________________________________
1995 K75T 73,000 miles
Stop Disk,Thrust washer behind the clutch basket  K100 only  Usa-lo10
    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum