BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   New member from US Empty New member from US Mon Apr 08, 2019 11:44 pm

K32kawasaki

K32kawasaki
New member
New member
I just bought the bike last weekend, ran great, 77000 miles, today started having a clunking noise in my driveshaft area, as I would slow down, if I need a rebuild kit, where do I get one, and what are my best options, not wanting to spend a lot.

    

2Back to top Go down   New member from US Empty Re: New member from US Tue Apr 09, 2019 1:52 am

Rick G

Rick G
admin
admin
You will need to remove the drive (4 x 10mm Allen head bolts) and from there remove the drive shaft but I suspect that it could be a uni joint. Have a search of the forum there are some Aussies who have replaced the uni.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

3Back to top Go down   New member from US Empty Noise Tue Apr 09, 2019 2:09 am

daveyson

daveyson
Life time member
Life time member
Hi K32Kwaka, 
Welcome

Does the odometer work and the mileage seem genuine?



Last edited by daveyson on Fri Oct 11, 2019 4:48 am; edited 1 time in total (Reason for editing : Edited the crap out of it)


__________________________________________________
11/1985 bmw k100rt (late model)  Vin. 0090567
 ~120,000 km
    

4Back to top Go down   New member from US Empty Re: New member from US Tue Apr 09, 2019 7:35 am

Dai

Dai
Life time member
Life time member
New member from US 177912 I'm with Rick - could be the UJ.


__________________________________________________
1983 K100 naked upgraded to K100LT spec after spending time as an RS and an RT
1987 K100RT
Others...
1978 Moto Guzzi 850-T3, 1979 Moto Guzzi 850-T3 California,1993 Moto Guzzi 1100ie California
2020 Royal Enfield Bullet 500
    

5Back to top Go down   New member from US Empty Re: New member from US Tue Apr 09, 2019 10:32 am

92KK 84WW Olaf

avatar
Life time member
Life time member
K32kawasaki wrote:I just bought the bike last weekend, ran great, 77000 miles, today started having a clunking noise in my driveshaft area, as I would slow down, if I need a rebuild kit, where do I get one, and what are my best options, not wanting to spend a lot.

Pop in the model and year....drive shaft changed from 16 to 20 spline in the early years....20 spline you can use K75/K100 but if you have a 16 spline you need an early K100 only, all K75 are 20 spline. An option if you have 16 spline is to swap to later 20 spline with a later 20 spline K100 final drive, straight swap. K75 will do it but its different ratio.


__________________________________________________
1992 K100LT 0193214 Bertha Blue 101,000 miles
1984 K100RT 0022575 Brutus Baja Red 578 bought 36,000 now 89,150 miles
1997 K1100LT 0188024 Wotan Mystic Red 689 58,645 now 106,950 miles Deceased.
1983 K100RS 0011157 Fricka 606 Alaska Blue 29,495 miles Damn K Pox Its a Bat outta Hell Now 58,200 miles. 
1996 K1100LT 0233004 Lohengrin Mystic Red 38,000 miles currently 48,061 miles.
1983 K100RS 0004449 Odette R100 colours 58,000 miles. Sprint fairing now 61,190 miles

Past:
1968 Yamaha 80 YG1
1971 Yamaha 125 YAS-1
1968 Honda 125 SS
1970 Honda CD 175
1973 Honda CB500-4
Honda CX 500
    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum