BMW K bikes (Bricks)

You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   help """""""""" K 100 LT 1988 Empty help """""""""" K 100 LT 1988 on Mon Aug 05, 2019 9:44 pm

wsiddins

wsiddins
active member
active member
Travelling on further I removed exhaust to clean out and discovered coolant in exhaust. Is this death
or could there be another cause. Cheers all , Wes affraid

    

2Back to top Go down   help """""""""" K 100 LT 1988 Empty Re: help """""""""" K 100 LT 1988 on Mon Aug 05, 2019 9:48 pm

RicK G

RicK G
VIP
VIP
I would say that the head gasket is shagged. It is a fairly straight forward job to fix it, all the info is available here and we are here to help.


__________________________________________________
"Every normal man must be tempted, at times, to spit upon his hands, hoist the black flag, and begin slitting throats."  from Mencken's 1919 Prejudices

Bikes 1993 K1100 LT, 1998 K1100 LT, 1993 K75 RT, 1996 K75RT, 1986 K75 GS, 1979 Z1300 Kawasaki X 2 for now
    

3Back to top Go down   help """""""""" K 100 LT 1988 Empty Re: help """""""""" K 100 LT 1988 on Mon Aug 05, 2019 9:49 pm

Laitch

Laitch
Life time member
Life time member
Have you checked the valve clearances yet?


__________________________________________________
1995 K75T 73,000 miles
help """""""""" K 100 LT 1988 Usa-lo10
    

4Back to top Go down   help """""""""" K 100 LT 1988 Empty help """""""""" K 100 LT 1988 on Mon Aug 05, 2019 10:05 pm

wsiddins

wsiddins
active member
active member
Not yet mate, should be done today affraid

    

5Back to top Go down   help """""""""" K 100 LT 1988 Empty help """""""""" K 100 LT 1988 on Mon Aug 05, 2019 10:55 pm

wsiddins

wsiddins
active member
active member
Valve clearances all good, do I remove head next to check gasket and where can I find how to do step
by step, cheers, Wes affraid

    

6Back to top Go down   help """""""""" K 100 LT 1988 Empty help """""""""" K 100 LT 1988 on Mon Aug 05, 2019 11:13 pm

wsiddins

wsiddins
active member
active member
@RicK G wrote:I would say that the head gasket is shagged. It is a fairly straight forward job to fix it, all the info is available here and we are here to help.
Where do I find info Rick, Wes

    

7Back to top Go down   help """""""""" K 100 LT 1988 Empty Re: help """""""""" K 100 LT 1988 on Mon Aug 05, 2019 11:55 pm

RicK G

RicK G
VIP
VIP
PM sent


__________________________________________________
"Every normal man must be tempted, at times, to spit upon his hands, hoist the black flag, and begin slitting throats."  from Mencken's 1919 Prejudices

Bikes 1993 K1100 LT, 1998 K1100 LT, 1993 K75 RT, 1996 K75RT, 1986 K75 GS, 1979 Z1300 Kawasaki X 2 for now
    

8Back to top Go down   help """""""""" K 100 LT 1988 Empty Re: help """""""""" K 100 LT 1988 on Tue Aug 06, 2019 4:44 am

92KK 84WW Olaf

92KK 84WW Olaf
Life time member
Life time member
Did you get to run the bike before stripping?


__________________________________________________
1992 K100LT 0193214 Bertha Alaska Blue 101,000 miles
1984 K100RT 0022575 Brutus Baja Red bought 36,000 now 89,150 miles
1997 K1100LT 0188024 Wotan Mystic Red 58,645 now 96,650 miles
1983 K100RS 0011175 Fricka 29,495 miles Damn K Pox Its a Bat outta Hell
    

9Back to top Go down   help """""""""" K 100 LT 1988 Empty help """""""""" K 100 LT 1988 on Tue Aug 06, 2019 6:48 pm

wsiddins

wsiddins
active member
active member
Ran bike before stripping, ran rough and stopped.

    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum