BMW K bikes (Bricks)

You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


Tjsunny2

Tjsunny2
active member
active member
Hi All,

The surprises with my project bike continue. I went to install the hose form the front master cylinder to the Y pipe and found that the previous owner did a thorough job of stripping all the threads out of the banjo bolt hole. Do any of you have one of these available?

Thanks,
Dan

K100 Front Brake "Y" Pipe Distribution Piece Img_9410


__________________________________________________
Early 1985 K100 RS being restored into a K100 Standard
    

mw074

mw074
active member
active member
Threads are perfect. Email me.K100 Front Brake "Y" Pipe Distribution Piece Img_1311

    

duck

duck
Life time member
Life time member


__________________________________________________
Current stable:
86 Custom K100 (standard fairing, K75 Belly pan, Ceramic chromed engine covers, paralever)
K75 Frankenbrick (Paralever, K11 front end, hybrid ABS, K1100RS fairing, radial tires)
86 K75C Turbo w/ paralever
94 K1100RS
93 K1100LT (x2)
91 K1
93 K75S (K11 front end)
91 K75S (K1 front end)
14 Yamaha WR250R
http://www.ClassicKBikes.com
    

Tjsunny2

Tjsunny2
active member
active member
I agree. That would be my preferred route at this point but I just had $150 worth of custom stainless lines made for the bike. I'm afraid that I'm married to the Y pipe.


__________________________________________________
Early 1985 K100 RS being restored into a K100 Standard
    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum