BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Engine Crash Bars for 16v K100RS>> Empty Engine Crash Bars for 16v K100RS>> Sun Sep 26, 2010 5:24 pm

Bonzo

Bonzo
Life time member
Life time member
Motobins/ Motorworks stock bars for the 8v, but not the 16v.

I wonder why? Thought it was the same dimensions 😕

    

green cat

green cat
Silver member
Silver member
I can't tell you why, but i'm sure they're different. The crash bars i have on my K1100 are sligthly different by the way they're fixed on the engine.


__________________________________________________
[img]Engine Crash Bars for 16v K100RS>> 3cc2228804714fdc8e93fe1f84a93706[/img][img]Engine Crash Bars for 16v K100RS>> K1100l10
    

Bonzo

Bonzo
Life time member
Life time member
Perhaps they thought none of the 16 valvers would get dropped Very Happy

Bizarre

Cheers green cat.

    

K-BIKE

avatar
Life time member
Life time member
I think it has to do with the underbelly pan fitted to the 16Valve would get in the way of the bottom mounting.
Regards,
K-BIKE

    

Bonzo

Bonzo
Life time member
Life time member
I figured the bellypan could be strategically drilled.

I have a copy of an early Ride magazine (UK Bike mag) that has a picture of an 8v with crash bars with a belly pan. It looked good.

If I can get hold of a scanner Ill put it on here, cos it was a whole buyers section on bricks and made for good reading. Very positive.

    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum