BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Aftermarket Clutch/Brake Levers? Empty Aftermarket Clutch/Brake Levers? Sun Oct 20, 2019 3:46 pm

tjh1985

tjh1985
Silver member
Silver member
Does anyone know of any aftermarket clutch (and matching brake lever) that the clutch cable lever nipple will fit WITHOUT having to drill/shave the lever to make it fit?
Aftermarket Clutch/Brake Levers? 15715910

http://www.thomashurst.com
    

2Back to top Go down   Aftermarket Clutch/Brake Levers? Empty Re: Aftermarket Clutch/Brake Levers? Tue Nov 19, 2019 4:24 am

Laitch

Laitch
Life time member
Life time member
gorio wrote:I would love some modern levers as well but there seems to be none around fir these bikes.
Here is the link to a thread indicating one remodeler's use of Ducati Monster hand levers, front master cylinder and switch gear on his K75. Perhaps you should contact him for more information.


__________________________________________________
1995 K75 90,000 miles
    

3Back to top Go down   Aftermarket Clutch/Brake Levers? Empty Re: Aftermarket Clutch/Brake Levers? Tue Nov 19, 2019 7:11 am

Dai

Dai
Life time member
Life time member
If the clutch nipple is the only real problem, get a bit of brass bar of the right diameter and make your own. I keep various diameters of brass just for odd jobs like that.


__________________________________________________
1983 K100 naked upgraded to K100LT spec after spending time as an RS and an RT
1987 K100RT
Others...
1978 Moto Guzzi 850-T3, 1979 Moto Guzzi 850-T3 California,1993 Moto Guzzi 1100ie California
2020 Royal Enfield Bullet 500
    

4Back to top Go down   Aftermarket Clutch/Brake Levers? Empty Re: Aftermarket Clutch/Brake Levers? Tue Nov 19, 2019 3:05 pm

Laitch

Laitch
Life time member
Life time member
gorio wrote: I still find it odd that with the number of these bikes out there someone hasn't made an aftermarket adjustable lever.
There are aftermarket adjustables and there are both electronic and mechanical thumb-operated shifters of which this is just one example.


__________________________________________________
1995 K75 90,000 miles
    

5Back to top Go down   Aftermarket Clutch/Brake Levers? Empty Re: Aftermarket Clutch/Brake Levers? Tue Nov 19, 2019 3:21 pm

MartinW

MartinW
Life time member
Life time member
K1200's had a hydraulic clutch. Probably not the simplest solution but with a bit (lot) of McGyvering it would also be possible to go Mechanical/Hydraulic retaining the OEM lever and modifying the OEM cable to attach to a hydraulic master cylinder. 
Regards Martin.


__________________________________________________
1992 K75s
    

6Back to top Go down   Aftermarket Clutch/Brake Levers? Empty Re: Aftermarket Clutch/Brake Levers? Wed Nov 20, 2019 10:00 am

Laitch

Laitch
Life time member
Life time member
gorio wrote:
Laitch wrote:There are aftermarket adjustables and there are both electronic and mechanical thumb-operated shifters of which this is just one example.
My foot still works for gear selection.
That's a blessing anyway. Clearly, I'm not the consultant for this modification because of my inability to differentiate hand problems from foot problems. Smile

I will observe that Martin could be on the right track suggesting a hydraulic clutch adaptation or a motorcycle with such a clutch might be the most effective choice if improvement of your left hand's mobility is in doubt.


__________________________________________________
1995 K75 90,000 miles
    

7Back to top Go down   Aftermarket Clutch/Brake Levers? Empty Re: Aftermarket Clutch/Brake Levers? Wed Nov 20, 2019 1:12 pm

MartinW

MartinW
Life time member
Life time member
Gorio changing levers is not just a simple matter. There are all sorts of things to worked out like pivot points, lever lengths and ratios. If you change the clutch lever travel by moving the lever closer to the bar the amount of travel is reduced which will not allow proper activation of the clutch. So in order to get back the travel reduction you have to change the lever length at the other end. Without correctly calculating and changing the lever length at the both ends could end up with a harder pull. Brake lever travel distance can be less of an issue and travel can be reduced slightly. The easiest way to reduce the amount of effort and keep the movement required to properly activate the clutch would be to go hydraulic or hydraulic slash mechanical. Calculations for lever lengths to do this conversion are still required.
Regards Martin.


__________________________________________________
1992 K75s
    

8Back to top Go down   Aftermarket Clutch/Brake Levers? Empty Re: Aftermarket Clutch/Brake Levers? Thu Nov 21, 2019 11:30 pm

duck

duck
Life time member
Life time member
Flanders makes (or at least used to make) an aftermarket clutch lever but it's just an exact clone of the factory clutch lever.


__________________________________________________
Current stable:
86 Custom K100 (standard fairing, K75 Belly pan, Ceramic chromed engine covers, paralever)
K75 Frankenbrick (Paralever, K11 front end, hybrid ABS, K1100RS fairing, radial tires)
86 K75C Turbo w/ paralever
94 K1100RS
93 K1100LT
91 K1
93 K75S (K11 front end)
91 K75S (K1 front end)
14 Yamaha WR250R
98 Taxi Cab K1200RS
14 K1600GT
http://www.ClassicKBikes.com
    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum