BMW K bikes (Bricks)

You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   K11RS part out Empty K11RS part out on Sun Feb 02, 2020 4:53 pm

Bedlam.Bambi

Bedlam.Bambi
active member
active member
I have a whole lot of parts available from a 1995 K1100RS available. 
100,000 miles on odometer.

Front end - RS handle bars
                 RS Yokes
                 41.7mm Marzocchi forks
                 Brake system (Master Cylinder w/lever, switches, throttle tube, flex hoses, splitter, callipers)
                 Rotors w/carriers
                 17x3.5 front wheel

Paralever  -  Final drive (silver)
                  Drive shaft
                  Swing arm (silver)

Engine 190/210/205/210 Have pictures of compression test results and last time it ran before disassembly
35mm throttles
Complete exhaust system (Cyl 3 needs welding at collector)
Gauge cluster
Tail assembly (with brake/tail/indicator) 
Bodywork (some panels are damaged, please inquire) Paint seems original - wine red in colour
Original seat (ok shape if you need one to flip a bike)
ABS parts (I rode the bike a few times before disassembly - half the time it functioned without issue and the other times it would blink 2 lights continuously and was inop)

Pictures available.

I'm building a track day bike using what was a 100% complete and running K11RS so there's plenty of other parts available. Almost everything. Ask for what you need.

    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum