BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Sump guard for LT? Empty Sump guard for LT? Wed Feb 08, 2012 6:22 am

sensei

avatar
active member
active member
Hi guys, I wonder if a sump guard - ss or alu - is available? Or if you have a design handy for DIY?

Thanks in advance

/Finn

    

2Back to top Go down   Sump guard for LT? Empty Re: Sump guard for LT? Thu Feb 09, 2012 1:04 am

blaKey

avatar
Life time member
Life time member
Have a look at the ADV Rider site and search on K100's and K75's.

There are some folks that have made their K's into a dirt bike and some have added a bash plate/sump guard. We cal them bash plates...well, because they get bashed!

I haven't seen anyone selling specific bash plates for our bikes.


__________________________________________________
Neil
K100RS 1986 RED!

Dress for the ride and the potential slide.
    

3Back to top Go down   Sump guard for LT? Empty Re: Sump guard for LT? Thu Feb 09, 2012 1:47 am

Two Wheels Better

Two Wheels Better
Moderator
Moderator
Those convenient threaded holes in either side of the engine down at the bottom and at each corner might be a good place to consider attaching some form of a custom-made aluminium bash plate/sump guard if you're doing some off-road riding. Keep in mind that they're only 6mm x 1.0 threads and therefore not the strongest bit of the bike. Perhaps rubber 'fuel pump mounts' might help to absorb some of the energy similar to what the early Airhead GS models used.

Sump guard for LT? Rubber10


__________________________________________________
1977 R75/7-100, '93 K11/K12 Big Block, '95 R100 Mystic, '96 K1100RS, '98 K1200RS, '06 K1200R & '09 K1300GT. Projects: 1993 & '96 K1100RS, & 1st '98 K1200RS.
The Mystic, Big Block, 2nd K1200RS, K12R & K13 are running & ridable.
    

4Back to top Go down   Sump guard for LT? Empty Re: Sump guard for LT? Thu Feb 09, 2012 5:17 am

charlie99

charlie99
VIP
VIP
those rubberised "insulators " are a common part from some of the electronic parts suppliers as well ...cheep as chips ....good suggestion gith


__________________________________________________
cheezy grin whilst riding, kinda bloke ....oh the joy !!!! ...... ( brick aviator )

'86 K100 RT..#0090401 ..."Gerty" ( Gertrude Von Clickandshift ) --------O%O
'86 k100 rs.. #######..  "Fred " (f(rame) red ) ( Fredrick leichtundschnell ) - -
bits and pieces from many kind friends across the k100 world ...with many thanks ..
1987 k100rs ########   "Red"  - (red sports rs TWB style )
1989 K100rt #009637   "Black Betty"  (naked rt ala Nigel , now sporting an rs main fairing )
    

5Back to top Go down   Sump guard for LT? Empty Re: Sump guard for LT? Thu Feb 09, 2012 6:14 am

Rick G

Rick G
admin
admin
They are used on the Holden Commodore under the air box or available from most farm machinery places and made by Bareco.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

6Back to top Go down   Sump guard for LT? Empty Re: Sump guard for LT? Thu Feb 09, 2012 7:38 am

Two Wheels Better

Two Wheels Better
Moderator
Moderator
Those mounts are used on Airhead battery boxes and Volkswagen fuel pumps, and any number of radiators. You can get 'em in 6 & 8mm too.


__________________________________________________
1977 R75/7-100, '93 K11/K12 Big Block, '95 R100 Mystic, '96 K1100RS, '98 K1200RS, '06 K1200R & '09 K1300GT. Projects: 1993 & '96 K1100RS, & 1st '98 K1200RS.
The Mystic, Big Block, 2nd K1200RS, K12R & K13 are running & ridable.
    

7Back to top Go down   Sump guard for LT? Empty Re: Sump guard for LT? Thu Feb 09, 2012 11:31 am

sidecar paul

sidecar paul
Life time member
Life time member
GitH,

Those tapped holes are actually 8mm. My sub-frame picks up on those, also the BMW crash bars.

Paul


__________________________________________________
'84 K100RS (0014643) (owned since '85), 86 K100RS (0018891) with Martello sidecar (built as an outfit in '88),
'51 Vincent (since '67),'72 Montesa Cota (from new), '87 Honda RS125R NF4 (bought 2015) 
....No CARS never ever!
    

8Back to top Go down   Sump guard for LT? Empty Re: Sump guard for LT? Fri Feb 10, 2012 11:39 am

sidecar paul

sidecar paul
Life time member
Life time member
Hi sensei,

I've just turned my spare engine on it's side and come up with an idea.

Use a plate, say 3mm alum or 1.5mm ss, about 230mm wide x 300mm long, with the end 70mm folded up at 45 degrees.

Fix this plate about 3mm clear of the sump plate fins with 4 right angle brackets to the above mentioned rubber bobbins screwed into the 8 mm holes in the sump pan.

When hitting a soft bump the rubber bobbins should flex and absorb the load. When hitting something big the rubber should flex enough to allow the plate to contact the fins, so the shock load would be spread across the fins rather than the 8mm fixings in the sump.

Well, it is an answer; I look forward to seeing an RT competing in the World Indoor Trials Championship.......Very Happy

Cheers, Paul.

    

9Back to top Go down   Sump guard for LT? Empty Re: Sump guard for LT? Sat Feb 11, 2012 5:10 pm

sensei

avatar
active member
active member
Hi guys, thanks for your advise, the rubber mounts is a great idea and combined with Paul's excellent suggestion, I will try and see if I can install a skid plate when it gets a bit warmer. At the moment it's bitterly cold here and my garage is deep frozen! Can't promise about the Trials Championship....but we are planning a 5500 km return trip from Denmark to North Cape and would like to go a bit off the beaten track Very Happy

Cheers

/Finn

    

10Back to top Go down   Sump guard for LT? Empty Re: Sump guard for LT? Sat Feb 11, 2012 6:13 pm

Crazy Frog

Crazy Frog
admin
admin
sidecar paul wrote:Hi sensei,

I've just turned my spare engine on it's side and come up with an idea.


If you have crash bars, why don't you use the lower mounting plate for the crash bars?
You can mount a couple of 90 degrees angle brackets on the plate, then mount the rubbers on the angle brackets then the sump guard on the rubbers.
This way you can cover move on any directions.

Sump guard for LT? Crash_10


__________________________________________________
Sump guard for LT? Frog15Sump guard for LT? Logo2101986 k75, 1985 K100rt, 1985 K100rt/EML GT2 sidecar, 1999 K1200lt/Hannigan Astro Sport sidecar.
    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum