BMW K bikes (Bricks)

You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down    Gearbox refitting on Sat Jul 13, 2013 11:05 pm

otto59


Silver member
Silver member
Okay, have put the gearbox back on but the clutch pushrod won't go all the way back in. Looks like the hole in the clutch it goes into is offset. I haven't touched the clutch. What gives?


__________________________________________________
"No one asks the victors if they told the truth."
    

2Back to top Go down    Re: Gearbox refitting on Sun Jul 14, 2013 1:35 am

RicK G

avatar
VIP
VIP
The only thing that will prevent that is the diaphragm spring is not sitting centre. Maybe the rod got a bend when removing the gearbox (easy to do) have you checked for that.


__________________________________________________
If everything seems under control then you aint goin fast enough:- Mario Andretti
Bikes 1986 K100RT, 1993 K1100 LT, 1994 K1100 LT, 1993 K75 RT, 1996 K75RT, 1986 K75 GS, 1979 Z1300 Kawasaki X 2 & 1976 SR 500 Yamaha for now
    

3Back to top Go down    Re: Gearbox refitting on Sun Jul 14, 2013 2:23 am

otto59


Silver member
Silver member
@RicK G wrote:The only thing that will prevent that is the diaphragm spring is not sitting centre. Maybe the rod got a bend when removing the gearbox (easy to do) have you checked for that.

Turns out that's exactly what it was. Thanks Rick!


__________________________________________________
"No one asks the victors if they told the truth."
    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum