Well the reason I couldn't find the pictures of this mini project was that in my rush to get the bike ready, I didn't take any.

Here is the oil caddy I built.

I bought two of these. Powermadd Polaris GEN II Chassis Oil Caddy.
(Well the actual ones I bought did not have that large side plate and did have the black bungee strap to hold the oil in the caddy.)



This is the exact one I bought. PowerMadd 74805 Spare Oil Storage for Polaris Gen II



And a bar of 1" x 4" aluminum stock.

I mount it in place of the right rear foot peg and was able to use the OEM bolt. I put it there for two reasons. One, it was closest to the oil fill on the K11 and two, I didn't give up any premium storage location.

















It worked perfectly!
.

Yer crazy!

You might want to consider using short bolts for F.  If you use one that's too long the rear one might scratch the FD.

Scratch the FD!?  

I meant swing arm.

I knew what you meant, I was just giving you a hard time sweetie.

(F) are the OEM bolts to my knowledge and nothing moves or flexes with that assembly.
I could go with shorter ones just to clean it up though.