BMW K bikes (Bricks)

You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


AL-58

AL-58
Life time member
Life time member
The right indicator switch on my 16v RS works but does not return.  Either the spring is missing or rusted from being stored outdoors by the PO.

I'm just looking for a rough switch block as a donor to disassemble for bits to repair mine.  8 valve or 16 valve is not important

Al


__________________________________________________
'87 K100RS/HRD sidecar (1100 motor)  sc25 
'92 K100RS-16v (Paint it Black)

'87 K100RT with Paralever backend

"When I'm too old and too foolish to handle a sidecar I'll buy a Sportsbike"

Right hand handlebar switchblock - condition not important. K-dogs10
    

robmack

robmack
Life time member
Life time member
The switch cluster may simply need disassembling and cleaning.  This guide illustrates the disassembly/cleaning/reassembly procedure. It will save you money having to buy a new switch assembly.


__________________________________________________
Robert
1987 K75 @k75retro.blogspot.ca
http://k75retro.blogspot.ca/
    

AL-58

AL-58
Life time member
Life time member
I've disassembled and cleaned them before.  I'm not intending to buy a new one.

The spring in the indicator switch is either missing or so rusty that it doesn't work. I was asking if someone had a broken/damaged one they didn't need as i'm only looking for that spring.


__________________________________________________
'87 K100RS/HRD sidecar (1100 motor)  sc25 
'92 K100RS-16v (Paint it Black)

'87 K100RT with Paralever backend

"When I'm too old and too foolish to handle a sidecar I'll buy a Sportsbike"

Right hand handlebar switchblock - condition not important. K-dogs10
    

Guest

avatar
Guest
...and I sent you a pm on Facebook.

    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum