BMW K bikes (Bricks)

You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


Fliggy

Fliggy
active member
active member
The seals have gone on the rear brake master cylinder on my 1991 K100RT and, consequently, I can't get any pressure on the brakes. I know you can get a kit to overhaul this but was wondering if there's anyone out there who has a spare master (12mm I think) or any other ideas how to fix.

Many thanks.


__________________________________________________
Fliggmeister :suspect:
1991 K100RT (iC) ViN:0097731
    

92KK 84WW Olaf

92KK 84WW Olaf
Life time member
Life time member
For what its worth unless you know the history of the replacement I would open it up and see if its ok for the seal and replacement piston kit rather than buy a complete used one.


__________________________________________________
1992 K100LT 0193214 Bertha Alaska Blue 101,000 miles
1984 K100RT 0022575 Brutus Baja Red bought 36,000 now 89,150 miles
1997 K1100LT 0188024 Wotan Mystic Red 58,645 now 98,780 miles
1983 K100RS 0011171 Fricka 29,495 miles Damn K Pox Its a Bat outta Hell No 32,600 miles
    

john87bmw

john87bmw
active member
active member
I got a brand new 13mm one, so check what size yours is!!

john

    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum