Can I fit K1100 coils in my K100 with out causing problems?

Nope. There's a whole host of differences from 8V coils to 16V, the primary resistance being the main.

Thanks

I'm fairly certain the K11 coils are 1.2 Ohms and the K100's are more like 3 Ohms, etc.

My 1 and 4 coil is open circuit, I was lucky to get back from Newcastle yesterday braking down under 3000 revs but it was OK above 3000 revs. Won't start today.

@Waz wrote:My 1 and 4 coil is open circuit, I was lucky to get back from Newcastle yesterday braking down under 3000 revs but it was OK above 3000 revs. Won't start today.

SHould have a couple of spare here if you need them Woz.  Sitting on the old sidecar engine still.

Al

Thanks Al
sent a PM

Glad you made it home mate, should be an easy fix! but Christ your unlucky

I have only riden it twice since I put them coils in

G'day Waz, Seems like the Newcastle Blue Boxers have put a hex on you. There can't be much more luck like that around. Cheers Tom

Thank you all and especially Al it lives again and is ready for scrapheap adventure ride.

phew ..!!  good to hear waz ....

good onya al ...poor old waz does seem to have issues time to time ....im sure not for trying hard .. I think many will agree that waz has been out there trying and succeeding in many new challenges ..

good riding to you .....enjoy the scrapheap ride ol mate