BMW K bikes (Bricks)

You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   TPS Operation on Motronic Set Up Empty TPS Operation on Motronic Set Up Sat Nov 28, 2015 4:56 am

mike d

avatar
Life time member
Life time member
On the K100 Jetronic system, the throttle position sender also has a function that cuts out the fuel injection when the revs are at certain level. Is this also true for the K1100 Motronic syetm?


Mike

    

2Back to top Go down   TPS Operation on Motronic Set Up Empty Re: TPS Operation on Motronic Set Up Sat Nov 28, 2015 6:35 am

Inge K.

Inge K.
VIP
VIP
Both Jetronic and Motronic cuts the signal to the injectors when the engine rpm is above 2000 and the throttle is closed.


__________________________________________________
Inge K.
K100RS -86. (first owner), K1100LTSE -94.
    

3Back to top Go down   TPS Operation on Motronic Set Up Empty Re: TPS Operation on Motronic Set Up Sat Nov 28, 2015 6:37 am

Rick G

Rick G
admin
admin
On a Motronic the ECU cuts the Fuel at 2000RPM the TPS just tells the ECU what position the throttle is all the way through the range. Unlike the TPS on a K100/K75 which has switches for closed and wide open.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 2004 K1200GT 1998 K1100 LT, 1986 K75 GS.
    

4Back to top Go down   TPS Operation on Motronic Set Up Empty Re: TPS Operation on Motronic Set Up Sat Nov 28, 2015 9:55 am

mike d

avatar
Life time member
Life time member
Thanks Inge & Rick,

Hi Rick, I was aware of the operational difference, between the on/off nature of the Jetronic and the complete range of the Motronic, but others may not have been.

Mike

    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum