BMW K bikes (Bricks)


You are not connected. Please login or register

K100-forum.com » Technical, repair and troubleshooting » Other K bricks (K75, K1100, K1) General discussion. » Best Vacuum Gauges for a K1100LT (UK Please) ~

View previous topic View next topic Go down  Message [Page 1 of 1]

David Nimrod

David Nimrod
Silver member
Silver member
Recommend me some Vacuum Gauges please... Best Vacuum Gauges for a K1100LT (UK Please) ~ 112350


__________________________________________________
What I'm out for is a good time
All the rest is Propaganda! Best Vacuum Gauges for a K1100LT (UK Please) ~ 112350
    

mike d

avatar
Life time member
Life time member
Morgan Carbtune

Mike

    

Corkboy

Corkboy
Life time member
Life time member
Seconded.

But - as they are needed so rarely - only really if you change valves, it would be cheaper to borrow a set if possible.


__________________________________________________
Regards,

Corkboy '87 K100RS SE (The black one - one of the two bikes I'm sorry I sold)
             '87 K100RS 0140995 (Gone)
             '97 K1100LT 0188024 (Gone)
             '08 K1200GT Wedge - but still a K
             '08 Transalp 700
    

mike d

avatar
Life time member
Life time member
I administer the UK BMW Club Tool Hire facility. It has a Morgan Carbtune that I hire out to members. The only problem is that sometimes you need to clean the stainless steel rods as they can get a bit sticky'. Have hired them out countless times as the work on carbs and throttle bodies.

Mike

    

Point-Seven-five

Point-Seven-five
Life time member
Life time member
Here's what I use.  Connect to two throttle bodies.  Transmission fluid in bottles flows to bottle connected to the highest vacuum.  Cost $15 and works as good or better than the fancy ones.

Best Vacuum Gauges for a K1100LT (UK Please) ~ Thrott12


__________________________________________________
Present: 1991 K100RS "Moby Brick Too"
 
Past:
1994 K75RT "Ilsa, She Wolf of the SS"
1988 K100RS SE "Special Ed"
1994 K75S "Cheetos"
1992 K100RS "Moby Brick" R.I.P.
1982 Honda FT500
1979 Honda XR185
1977 Honda XL125
1974 Honda XL125
1972 OSSA Pioneer 250
1968 Kawasaki 175
    

David Nimrod

David Nimrod
Silver member
Silver member
Thanks for the info... much appreciated Best Vacuum Gauges for a K1100LT (UK Please) ~ 112350


__________________________________________________
What I'm out for is a good time
All the rest is Propaganda! Best Vacuum Gauges for a K1100LT (UK Please) ~ 112350
    

Dai

Dai
Life time member
Life time member
Davida. They'll take a far greater battering than the Morgan and still come back for more. Mine are now around 25 years old.


__________________________________________________
1983 K100 naked upgraded to K100LT spec after spending time as an RS and an RT
1987 K100RT
Others...
1978 Moto Guzzi 850-T3, 1979 Moto Guzzi 850-T3 California,1993 Moto Guzzi 1100ie California
2020 Royal Enfield Bullet 500
    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

K100-forum.com » Technical, repair and troubleshooting » Other K bricks (K75, K1100, K1) General discussion. » Best Vacuum Gauges for a K1100LT (UK Please) ~

Permissions in this forum:
You cannot reply to topics in this forum