BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


commanderdrako

commanderdrako
active member
active member
I am modifying my 1992 K100RS into a scrambler. Can you pls help me on how to remove the front ABS sensors? I removed the screws but the sensor is stocked. I tried hitting it but it wouldn't budge. I tried twisting it too but no luck. Is there any special way of removing it? Any help is appreiciated.


__________________________________________________
1992 K100RS
VIN 6494041

2009 Aprilia Tuono
1985 Yamaha Maxim X (sold)
    

duck

duck
Life time member
Life time member
It should come right out once the screws are removed.

Maybe try some penetrating oil and let it sit overnight?

Failing that, put a block of wood over that and try to tap it out with a hammer?


__________________________________________________
Current stable:
86 Custom K100 (standard fairing, K75 Belly pan, Ceramic chromed engine covers, paralever)
K75 Frankenbrick (Paralever, K11 front end, hybrid ABS, K1100RS fairing, radial tires)
86 K75C Turbo w/ paralever
94 K1100RS
93 K1100LT
91 K1
93 K75S (K11 front end)
91 K75S (K1 front end)
14 Yamaha WR250R
98 Taxi Cab K1200RS
14 K1600GT
http://www.ClassicKBikes.com
    

Born Again Eccentric

Born Again Eccentric
Life time member
Life time member
The sensor can get quite corroded into its bracket on the brake calliper - even with the 2 screws removed, it is not unusual for it to be struck fast. I've come across a couple like that. Try soaking in penetrating oil as recommended by Duck. 

If you are trying to get the sensor off intact, you will have less options, but vice grips (mole grips) may help with the twisting if you are not bothered about mangling the sensor.

When it comes to percussive persuasion (hammer), make sure that you do use a block of wood - the sensor body is quite soft and is easy to deform and you could end up making things even worse (gets even tighter in the hole as you turn it into an expensive rivet) - might be too late already, if you have already had a few well meaning bashes at it!


__________________________________________________
HELP! Need help in removing front whhel ABS sensor on a 1992 K100RS Uk-log10 HELP! Need help in removing front whhel ABS sensor on a 1992 K100RS Sco-lo15
                              Paul  HELP! Need help in removing front whhel ABS sensor on a 1992 K100RS 905546712

"Heidi" K100LT 1991 (Grey) (VIN 0190172 Engine No. 104EB 2590 2213) - 5th owner. January 2014 (34,000 - 61,000 miles and counting....)
"Gretel" K100LT 1989 (Silver Grey) (VIN 0177324 Engine No. 104EA 2789 2211) - 4th+ owner. September 2015 (58,500miles and counting....). Cat C Insurance write-off rebuild Feb 17
"Donor" K100LT 1990 (Red)  (VIN 0178091 Engine No. 4489 2024) - 6th & final owner (crash write-off now donor bike).   June 2012 (73,000 miles) to November 2013 (89,500 miles)
    

duck

duck
Life time member
Life time member
I may be wrong but I got the impression he was dealing with the front ABS sensor.  On the 4V K bikes it mounts at the bottom of the left fork, not on the caliper.


__________________________________________________
Current stable:
86 Custom K100 (standard fairing, K75 Belly pan, Ceramic chromed engine covers, paralever)
K75 Frankenbrick (Paralever, K11 front end, hybrid ABS, K1100RS fairing, radial tires)
86 K75C Turbo w/ paralever
94 K1100RS
93 K1100LT
91 K1
93 K75S (K11 front end)
91 K75S (K1 front end)
14 Yamaha WR250R
98 Taxi Cab K1200RS
14 K1600GT
http://www.ClassicKBikes.com
    

Born Again Eccentric

Born Again Eccentric
Life time member
Life time member
duck wrote:I may be wrong but I got the impression he was dealing with the front ABS sensor.  On the 4V K bikes it mounts at the bottom of the left fork, not on the caliper.
That made me think...and then go and look. 

Both my K100LTs (2V) have the sensor mounted on the brake calliper, both front and back. 

I didn't realise that the 4V models mounted the front sensor differently - my bad, apologies for not appreciating that K100RS in question was a 4V model and therefore different. Embarassed


__________________________________________________
HELP! Need help in removing front whhel ABS sensor on a 1992 K100RS Uk-log10 HELP! Need help in removing front whhel ABS sensor on a 1992 K100RS Sco-lo15
                              Paul  HELP! Need help in removing front whhel ABS sensor on a 1992 K100RS 905546712

"Heidi" K100LT 1991 (Grey) (VIN 0190172 Engine No. 104EB 2590 2213) - 5th owner. January 2014 (34,000 - 61,000 miles and counting....)
"Gretel" K100LT 1989 (Silver Grey) (VIN 0177324 Engine No. 104EA 2789 2211) - 4th+ owner. September 2015 (58,500miles and counting....). Cat C Insurance write-off rebuild Feb 17
"Donor" K100LT 1990 (Red)  (VIN 0178091 Engine No. 4489 2024) - 6th & final owner (crash write-off now donor bike).   June 2012 (73,000 miles) to November 2013 (89,500 miles)
    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum