BMW K bikes (Bricks)

You are not connected. Please login or register

K100-forum.com » Technical, repair and troubleshooting » Engine and transmission » Rubber Fitting

View previous topic View next topic Go down  Message [Page 1 of 1]

1Back to top Go down   Rubber Fitting Empty Rubber Fitting Tue Oct 17, 2017 2:22 am

kevinryu

kevinryu
active member
active member
I noticed the first drop of oil on the ground and found this rubber elbow split. Does anyone know what I would call this part if I were to search for one online? Or where I may find one? (not sure where the pics I've uploaded go as it's my first time uploading here ) I believe it's just a breather hose as it only drips out if I really rev it up..

    

2Back to top Go down   Rubber Fitting Empty Re: Rubber Fitting Tue Oct 17, 2017 2:59 am

Rick G

Rick G
admin
admin
Its probably the Z shaped rubber hose from the plenum above the FI bodies to the crankcase.
Available at Motobins and get 2 because they often only last a few years.
https://www.motobins.co.uk/bmw-parts.php?model=K%20Series&bikeref=K100 you will find it under engine parts/engine breather parts


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 2004 K1200GT 1999 K1100 LT.
    

3Back to top Go down   Rubber Fitting Empty Re: Rubber Fitting Tue Oct 17, 2017 3:30 am

indian036

indian036
Life time member
Life time member
Alternatively from the other good UK parts source, https://www.motorworks.co.uk/vlive/Shop/Parts.php?T=6&Q=ENA60480&x=0&y=0

If you're looking at other sources, the BMW part number is 11151460480


As always, good advice from Rick to have a spare on hand. The rubber isn't the most durable around.


Bill


__________________________________________________
1985 K100RT  VIN 0028991  My original Very Happy   (Historic rego)
1985 K100RT  VIN 0029036  BOB the Blue Old Bike  (Historic rego)
1990 K100LT  VIN 0190452  Work in progress
1984 K100RT  VIN 0023022  Work needing lots of progress
1986 K100RT  VIN 0090542  Work needing lots and lots of progress
1993 K1100LT  VIN 0183046  Work in progress
1993 K75S  VIN 0213045  Newest toy, slightly non-original
    

4Back to top Go down   Rubber Fitting Empty Re: Rubber fitting Tue Oct 17, 2017 12:06 pm

kevinryu

kevinryu
active member
active member
Beautiful!! Thank you Smile) cheers

    

View previous topic View next topic Back to top  Message [Page 1 of 1]

K100-forum.com » Technical, repair and troubleshooting » Engine and transmission » Rubber Fitting

Permissions in this forum:
You cannot reply to topics in this forum