BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Gearbox/transmission bearings Empty Gearbox/transmission bearings Sun Feb 18, 2018 7:07 am

smoll1

avatar
Silver member
Silver member
Hi all

Just quick question that I'm sure someone has experience of.

I am about to change the bearings in a used gearbox/transmission. I have the sizes from the download page.

Here is question does anyone know what clearance the bearing should have. For example standard (cn) or c3 as some people use in places with more heat ?

Just want to save some money over the genuine BMW costs and get this gearbox ready before the other fails. 

Any help would be great. 

Another thought what brand is best koyo, skf, fag?

    

2Back to top Go down   Gearbox/transmission bearings Empty Re: Gearbox/transmission bearings Sun Feb 18, 2018 9:25 am

Rick G

Rick G
admin
admin
Any of those brands are fine and set up the shims as per the manual. I
f you don't have a manual send a PM and I will send a link for a free one.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

3Back to top Go down   Gearbox/transmission bearings Empty Gearbox/transmission bearings Sun Feb 18, 2018 7:41 pm

smoll1

avatar
Silver member
Silver member
Hi thanks

Yes I have the manuals from forum

What I was referring to was the clearance of the bearing itself when it is manufactured. I have read all the manual on the shim clearance an I think I understand that.

It's just the bearing itself. Hope that helps clarify. 

Thanks 

Smoll

    

4Back to top Go down   Gearbox/transmission bearings Empty Re: Gearbox/transmission bearings Sun Feb 18, 2018 8:25 pm

Rick G

Rick G
admin
admin
The correct shims will give the correct running clearances on the bearings.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

5Back to top Go down   Gearbox/transmission bearings Empty Gearbox/transmission bearings Mon Feb 19, 2018 12:23 am

smoll1

avatar
Silver member
Silver member
Ok

What about the ball bearing not tapered ones. Is the clearance between the balls and outer race standard or larger like a c3 bearing. 

For example can't remember exactly bearing number a 6203 c3 or non stamped which would be standard like used in wheel bearing.

I'm not brilliant at explaining myself.

Thanks for help though.

Smoll

    

6Back to top Go down   Gearbox/transmission bearings Empty Gearbox/transmission bearings Mon Feb 19, 2018 1:32 am

smoll1

avatar
Silver member
Silver member
From what research I can do on net the airhead gearbox uses c3 bearings so I suppose ks are the same.

    

7Back to top Go down   Gearbox/transmission bearings Empty Re: Gearbox/transmission bearings Mon Feb 19, 2018 9:59 am

Rick G

Rick G
admin
admin
Ball races are set from factory and cant be changed.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

8Back to top Go down   Gearbox/transmission bearings Empty Re: Gearbox/transmission bearings Mon Feb 19, 2018 10:34 am

Inge K.

Inge K.
VIP
VIP


__________________________________________________
Inge K.
K100RS -86. (first owner), K1100LTSE -94.
    

9Back to top Go down   Gearbox/transmission bearings Empty Re: Gearbox/transmission bearings Mon Feb 19, 2018 11:21 am

Inge K.

Inge K.
VIP
VIP
Smoll, you find at least two bearings marked C3 in Shoganai's tranny thread.
Have a look around, lot of pics......

This thread was also on this forum earlier (among a lot of other forums)
but I don't find it back.  Gearbox/transmission bearings 78846


http://www.motobrick.com/index.php/topic,1808.msg9557.html#msg9557


__________________________________________________
Inge K.
K100RS -86. (first owner), K1100LTSE -94.
    

10Back to top Go down   Gearbox/transmission bearings Empty Gearbox/transmission bearings Mon Feb 19, 2018 11:03 pm

smoll1

avatar
Silver member
Silver member
Thanks guys

I had an old gearbox which I took the bearings off earlier following the advice you gave.

All the bearings were c3 as well so that's good news. 

I will keep everyone posted how I get on. It will be interesting to see what bearings are in the gearbox I am refurbishing. I will put number up when I have checked both gearboxes, hopefully they all same and it might help someone else on forum. 

Thanks for everyone's help. Forum is great.😀😀😀

    

11Back to top Go down   Gearbox/transmission bearings Empty Gearbox/transmission Sat Mar 03, 2018 12:13 am

smoll1

avatar
Silver member
Silver member
Right

Now the snow has arrived I have been able to strip the 2nd gearbox.

These are codes I found on the bearings.

1st gearbox

Intermediate shaft - Fag 6303.E.C3 (both of them)
Output shaft - Fag 6204.E.C3
Output shaft - Koyo 6205R C3

2nd gearbox

Intermediate shaft - Skf 6303.ETN9.C3 (both of them)
Output shaft - Skf 6204.E.C3
Output shaft - Koyo 6205R

Does this sound about right to anyone. I can't find any bearings with the E in the code apart from the Etn9 ones.

It makes it confusing. I have confirmed they are all C3 clearance which is good. Now confused about the E marking. Are these different to a standard 6303.C3. 

Hopefully someone has rebuilt gearbox before and might know.

Thanks smoll

    

12Back to top Go down   Gearbox/transmission bearings Empty Re: Gearbox/transmission bearings Sat Mar 03, 2018 2:14 am

Inge K.

Inge K.
VIP
VIP
smoll1 wrote:
I can't find any bearings with the E in the code apart from the Etn9 ones.

It makes it confusing. I have confirmed they are all C3 clearance which is good. Now confused about the E marking. Are these different to a standard 6303.C3. 

From the SKF page.

E = Reinforced ball set
TN = PA66 cage, ball centred
TN9 = Glass fibre reinforced PA66 cage, ball centred

PA66 is the standard cage material for many super-precision cylindrical roller bearings and angular contact thrust ball bearings.


__________________________________________________
Inge K.
K100RS -86. (first owner), K1100LTSE -94.
    

13Back to top Go down   Gearbox/transmission bearings Empty Gearbox/transmission Sat Mar 03, 2018 3:18 am

smoll1

avatar
Silver member
Silver member
I saw that on Skf site. I have spoken to a couple bearing suppliers and I mentioned the E mark. They say the standard bearings are ok. I was a bit sceptical of these comments.

I can't seem to find anyone apart from Motobins/works.

They said it was an old code system. This just made me doubt even more. 

Surely some one sells what I need but not at bmw prices?

    

14Back to top Go down   Gearbox/transmission bearings Empty Re: Gearbox/transmission bearings Sat Mar 03, 2018 7:20 am

Inge K.

Inge K.
VIP
VIP
Could be that the "E" marked bearings is special made for the automotive industry. Gearbox/transmission bearings Idunno10


__________________________________________________
Inge K.
K100RS -86. (first owner), K1100LTSE -94.
    

15Back to top Go down   Gearbox/transmission bearings Empty Gearbox/transmission Sat Mar 03, 2018 9:19 pm

smoll1

avatar
Silver member
Silver member
That could be the case and makes sense

    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum