Ok here goes
My machine is a '92 K1100lt and in fine shape
But
 I have a spare  saddle from a later model (post '93) that i would like to use...
The problem i am having is with the rear bracket on later saddle as it appears to be lower (shorter) by about a half inch ( sorry, I'm pre-decimalisation) and makes it awkward to pivot the saddle up. The seat mouldings are quite different actually.

I wonder if any of you could tell me the bracket part number as i am having difficulty finding it

Thanks
Rod

I should say that i have tried to fit my current rear bracket to the newer saddle and thats when i reasised the problem.  ?

The later bikes had about a half inch of rubber in the mounting brackets.  You can make things fit by adding your own about 1/2" spacers.  Been there, done that.

ETA: They don't have to be rubber spacers.  I used HDPE. (Plastic)

DeRodster wrote:
I wonder if any of you could tell me the bracket part number as i am having difficulty finding it

Front: 52 53 2 307 568
Rear: 52 53 2 307 572

Hi Rod

As already mentioned the later seats had rubber in the front and rear mounting bracket's.

Take a look at this page

https://www.motorworks.co.uk/vlive/Shop/Parts.php?T=5&NU=15&M=40&Ct=UA&SbCt=BA_15_40_UA_50

Go raibh maith agaibh, Merci, Gracias, Thank you

This is why this site is of such great value to us K'ers, I knew I just had to ask

Ordering now ( I could try that Duck , but just want no hassle fitting if poss !)

Slán
Rod

well as soon as they get back from lunch ;-)