BMW K bikes (Bricks)

You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Not sure where this came from Empty Not sure where this came from Tue Jul 24, 2018 9:41 pm

Ohts

Ohts
active member
active member
So I'm changing my oil, about 10 seconds after I remove the oil fitter, this washer / seal drops out about where the filter was???  Its not the washer from the oil screw, but about the same size.

Not sure where this came from 20180710

    

2Back to top Go down   Not sure where this came from Empty Re: Not sure where this came from Wed Jul 25, 2018 1:41 am

Two Wheels Better

Two Wheels Better
Moderator
Moderator
Good, no marks on the seal so it didn't get whirled round and do damage. It probably just came to rest in the bottom of the pan. Is this bike new to you, or have others done the maintenance? See if it fits over the threaded stub the oil filter attaches to. I've known of people thinking a seal needs to be fitted there before screwing a new oil filter in.

    

3Back to top Go down   Not sure where this came from Empty maybe Wed Jul 25, 2018 4:16 am

Ohts

Ohts
active member
active member
keeping my fingers crossed at this point...

Yes the bike is new to me.  First oil change.  no leaks since I started it...

    

4Back to top Go down   Not sure where this came from Empty Re: Not sure where this came from Thu Jul 26, 2018 12:14 am

Curley

Curley
Silver member
Silver member
Do you have a picture of the seal?

    

5Back to top Go down   Not sure where this came from Empty Re: Not sure where this came from Thu Jul 26, 2018 12:27 am

Laitch

Laitch
Life time member
Life time member
@Curley wrote:Do you have a picture of the seal?
The photo in the first post showing a white circular object emblazoned upon a copper-colored field would be that, Curley.

    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum