BMW K bikes (Bricks)

You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   K1100LT Heat Screen Installation Empty K1100LT Heat Screen Installation Sun Jan 13, 2019 8:10 pm

yamarider

yamarider
active member
active member
Anybody who knows how to install these pesky K1100LT Heat Screens?

https://goo.gl/images/CH6Sgd

picture of heat screens


I cannot figure for the love of it where the small rubber things go. The large one is easy as it is shaped to go under the tank and hug the air intake, but what about the small one?

Unfortunately, I forgot to take picture before i stripped it down. 

Any drawing or photos would be greatly appreciated as the manual or the parts catalogue does not specify WHERE they go...

Many thanks

http://www.yamarider.com
    

2Back to top Go down   K1100LT Heat Screen Installation Empty Re: K1100LT Heat Screen Installation Sun Jan 13, 2019 8:14 pm

92KK 84WW Olaf

avatar
Life time member
Life time member
The two lower left ones in the photo go inside the fairing lowers, around the fuel injector rail/air box on left side and other one goes right side.


__________________________________________________
1992 K100LT 0193214 Bertha Blue 101,000 miles
1984 K100RT 0022575 Brutus Baja Red 578 bought 36,000 now 89,150 miles
1997 K1100LT 0188024 Wotan Mystic Red 689 58,645 now 106,950 miles Deceased.
1983 K100RS 0011171 Fricka 606 Alaska Blue 29,495 miles Damn K Pox Its a Bat outta Hell Now 49,840 miles. 
1996 K1100LT 0233004 Lohengrin Mystic Red 38,000 miles currently 42,640 miles.

Past:
1968 Yamaha 80 YG1
1971 Yamaha 125 YAS-1
1968 Honda 125 SS
1970 Honda CD 175
1973 Honda CB500-4
Honda CX 500
    

3Back to top Go down   K1100LT Heat Screen Installation Empty Re: K1100LT Heat Screen Installation Sun Jan 13, 2019 9:50 pm

yamarider

yamarider
active member
active member
Have you got a picture by any chance?

I fiddled with it but was unable to fit it in its correct spot...

http://www.yamarider.com
    

4Back to top Go down   K1100LT Heat Screen Installation Empty Re: K1100LT Heat Screen Installation Sun Jan 13, 2019 9:53 pm

Dai

Dai
Life time member
Life time member
The fuel rail one? Push it somewhere about right and then walk away from it. I used to look after a K1100LT and I could never get that particular piece of vibration damper to stay put. It would go in, I'd line it up and then it would promptly squirm out of place again.


__________________________________________________
1983 K100 upgraded to K100RS spec, 1987 K100RT
Others...
1978 Moto Guzzi 850-T3, 1979 Moto Guzzi 850-T3 California,1993 Moto Guzzi 1100ie California
2020 Royal Enfield Bullet 500
    

5Back to top Go down   K1100LT Heat Screen Installation Empty Re: K1100LT Heat Screen Installation Sun Jan 13, 2019 10:26 pm

duck

duck
Life time member
Life time member
Ditto on the fuel rail one.  Just get it close.


__________________________________________________
Current stable:
86 Custom K100 (standard fairing, K75 Belly pan, Ceramic chromed engine covers, paralever)
K75 Frankenbrick (Paralever, K11 front end, hybrid ABS, K1100RS fairing, radial tires)
86 K75C Turbo w/ paralever
94 K1100RS
93 K1100LT (x2)
91 K1
93 K75S (K11 front end)
91 K75S (K1 front end)
14 Yamaha WR250R
98 Taxi Cab K1200RS
14 K1600GT
http://www.ClassicKBikes.com
    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum