BMW K bikes (Bricks)

You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Caliper half torque settings Empty Caliper half torque settings on Sat Apr 27, 2019 5:14 am

tinyspuds

tinyspuds
Life time member
Life time member
Morning all,
Just split, cleaned, and replaced the seals in front and rear calipers (TBH, Spuds 2 : Brembo 1. No inducement would free 1 of the front bleeders and I ended up cracking the case with a reverse threader Embarassed).

Still very much a job worth doing as the muck, corruption and stuck pistons have benefited from the attention.

Does anyone know the recommended torque setting for the half bolts. Searched all around but can’t find it. I’ll run with a low 20 ft/lb unless someone can advise.
Cheers, Stu


__________________________________________________
1985 BMW K100RT + Hedingham HUB and LL’s. VIN 0028106. (Not blind to the irony of an April 1 production date).
1954 Royal Enfield 350 Bullet. Original.
    

2Back to top Go down   Caliper half torque settings Empty Re: Caliper half torque settings on Sat Apr 27, 2019 7:25 am

Dai

Dai
Life time member
Life time member


__________________________________________________
'83 K100 upgraded to K100RS spec, '87 K100RT
Others...
'78 Moto Guzzi 850-T3, '79 Moto Guzzi 850-T3 California,'93 Moto Guzzi 1100ie California
    

3Back to top Go down   Caliper half torque settings Empty Re: Caliper half torque settings on Sat Apr 27, 2019 7:30 am

tinyspuds

tinyspuds
Life time member
Life time member
Thanks Dai. Whoops, I'll be backing that off then 👍


__________________________________________________
1985 BMW K100RT + Hedingham HUB and LL’s. VIN 0028106. (Not blind to the irony of an April 1 production date).
1954 Royal Enfield 350 Bullet. Original.
    

4Back to top Go down   Caliper half torque settings Empty Re: Caliper half torque settings on Sat Apr 27, 2019 7:31 am

tinyspuds

tinyspuds
Life time member
Life time member
PS. Great table. Cheers. Stu


__________________________________________________
1985 BMW K100RT + Hedingham HUB and LL’s. VIN 0028106. (Not blind to the irony of an April 1 production date).
1954 Royal Enfield 350 Bullet. Original.
    

5Back to top Go down   Caliper half torque settings Empty Re: Caliper half torque settings on Sat Apr 27, 2019 8:52 am

Ringfad

Ringfad
Life time member
Life time member
And here is the official version from the manual - not a great scan but should be readable

Caliper half torque settings Rear_b10


__________________________________________________
Caliper half torque settings Ir-log10

   ;BMW; K100RS Style Black 1987 105K Km     ;BMW; K1 Black 1993 51K Km     ;BMW; K1100RS Red 1993 70k miles (exiled in Alicante at the moment)  ;BMW; K100 16V Black (ex ElectricMonk)  ;BMW;  K1100LT (Swiss) soon to be an RS
    

6Back to top Go down   Caliper half torque settings Empty Re: Caliper half torque settings on Sat Apr 27, 2019 10:01 am

tinyspuds

tinyspuds
Life time member
Life time member
Thanks guys.


__________________________________________________
1985 BMW K100RT + Hedingham HUB and LL’s. VIN 0028106. (Not blind to the irony of an April 1 production date).
1954 Royal Enfield 350 Bullet. Original.
    

7Back to top Go down   Caliper half torque settings Empty Re: Caliper half torque settings on Sat Apr 27, 2019 3:23 pm

Dai

Dai
Life time member
Life time member
22 ft/lbs then. Near enough Very Happy


__________________________________________________
'83 K100 upgraded to K100RS spec, '87 K100RT
Others...
'78 Moto Guzzi 850-T3, '79 Moto Guzzi 850-T3 California,'93 Moto Guzzi 1100ie California
    

8Back to top Go down   Caliper half torque settings Empty Re: Caliper half torque settings on Sat Apr 27, 2019 4:50 pm

tinyspuds

tinyspuds
Life time member
Life time member
😁


__________________________________________________
1985 BMW K100RT + Hedingham HUB and LL’s. VIN 0028106. (Not blind to the irony of an April 1 production date).
1954 Royal Enfield 350 Bullet. Original.
    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum