BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   RT screen fixings Empty RT screen fixings Fri Jun 26, 2020 1:12 pm

Dai

Dai
Life time member
Life time member
How is the screen on an RT fixed to the fairing? I'n assuming that it doesn't use metal bolts but I don't have anything in the big box of bits that came with Kostenlot to let me take a good guess.


__________________________________________________
1983 K100 naked upgraded to K100LT spec after spending time as an RS and an RT
1987 K100RT
Others...
1978 Moto Guzzi 850-T3, 1979 Moto Guzzi 850-T3 California,1993 Moto Guzzi 1100ie California
2020 Royal Enfield Bullet 500
    

2Back to top Go down   RT screen fixings Empty Re: RT screen fixings Fri Jun 26, 2020 1:55 pm

charlie99

charlie99
VIP
VIP
ill guess that you dont have the threaded speed clips that fit around the fairing surround  that take the 5mm bolts through the screen ?

if im reading this post correctly

i think ill have to take a pic ?

below

RT screen fixings 20200326

i have used 5 mm  x 25 mm stainless with a slightly bigger washer , to spread the load of tightening across the
um ...perspex ... for want of a better description

note  the 2 rear most fixing locations (nearest the rider ), wont accept the speed clips because of the thinness  of the fibreglass at that location , i just use a good sized washer at the lower end of the bolt , with some cushioning rubber  closest the the fairing as a buffer .  nylock nut at the bottom .


hope that helps ...


__________________________________________________
cheezy grin whilst riding, kinda bloke ....oh the joy !!!! ...... ( brick aviator )

'86 K100 RT..#0090401 ..."Gerty" ( Gertrude Von Clickandshift ) --------O%O
'86 k100 rs.. #######..  "Fred " (f(rame) red ) ( Fredrick leichtundschnell ) - -
bits and pieces from many kind friends across the k100 world ...with many thanks ..
1987 k100rs ########   "Red"  - (red sports rs TWB style )
1989 K100rt #009637   "Black Betty"  (naked rt ala Nigel , now sporting an rs main fairing )
    

3Back to top Go down   RT screen fixings Empty Re: RT screen fixings Fri Jun 26, 2020 2:29 pm

92KK 84WW Olaf

avatar
Life time member
Life time member
The fixings on the nibs near the rider are 10mm bolts on the inside and longer screws on the outside.


__________________________________________________
1992 K100LT 0193214 Bertha Blue 101,000 miles
1984 K100RT 0022575 Brutus Baja Red 578 bought 36,000 now 89,150 miles
1997 K1100LT 0188024 Wotan Mystic Red 689 58,645 now 106,950 miles Deceased.
1983 K100RS 0011157 Fricka 606 Alaska Blue 29,495 miles Damn K Pox Its a Bat outta Hell Now 58,200 miles. 
1996 K1100LT 0233004 Lohengrin Mystic Red 38,000 miles currently 48,061 miles.
1983 K100RS 0004449 Odette R100 colours 58,000 miles. Sprint fairing now 61,190 miles

Past:
1968 Yamaha 80 YG1
1971 Yamaha 125 YAS-1
1968 Honda 125 SS
1970 Honda CD 175
1973 Honda CB500-4
Honda CX 500
    

4Back to top Go down   RT screen fixings Empty Re: RT screen fixings Fri Jun 26, 2020 4:27 pm

Dai

Dai
Life time member
Life time member
Thanks guys. Charlie confirmed my supposition regarding the spire nuts as the fairing did come with them attached minus the four rear. The question I should have asked was: what is used to spread the load through the lexan screen? I did what I should have done in the first place and scrabbled around in the garage roof for the two screens I have. One had the answer; there was a single solitary convex plastic washer stuck to the lexan. Yet another call to Motorworks coming up...

Just FYI: they don't show on RealOEM.


__________________________________________________
1983 K100 naked upgraded to K100LT spec after spending time as an RS and an RT
1987 K100RT
Others...
1978 Moto Guzzi 850-T3, 1979 Moto Guzzi 850-T3 California,1993 Moto Guzzi 1100ie California
2020 Royal Enfield Bullet 500
    

5Back to top Go down   RT screen fixings Empty Re: RT screen fixings Fri Jun 26, 2020 4:38 pm

Two Wheels Better

Two Wheels Better
Moderator
Moderator
46 63 1 453 997 x 8 is shown as a 'hollow washer' under the screws and then washer 46 63 1 455 994 x 4 under the screen but above the 'clip nut' in the front main 'screen attachments for an RT in RealOEM. I have found over the years that it takes a fair amount of 'interpreting' of ETK to locate the bits required. It's a bit of a hunt and peck method. In fact, BMWNA, Chrysler, Subaru, VW/Audi & etc., call parts people "Parts Interpreters" in their official training classes.

RealOem US K100RT Section 46


__________________________________________________
1977 R75/7-100, '93 K11/K12 Big Block, '95 R100 Mystic, '96 K1100RS, '98 K1200RS, '06 K1200R & '09 K1300GT. Projects: 1993 & '96 K1100RS, & 1st '98 K1200RS.
The Mystic, Big Block, 2nd K1200RS, K12R & K13 are running & ridable.
    

6Back to top Go down   RT screen fixings Empty Re: RT screen fixings Fri Jun 26, 2020 4:54 pm

MartinW

MartinW
Life time member
Life time member
Automotive speed shops and Ebay should have countersunk aluminium washers. They come in various sizes and colours. https://www.ebay.com.au/itm/1-1-4-ALUMINIUM-COUNTERSUNK-BODY-WASHERS-PANEL-FASTENERS-10-PK-Hotrod/131359937946?hash=item1e95a9959a:g:8GgAAOSw0vBUdA~y
Regards Martin.


__________________________________________________
1992 K75s
    

7Back to top Go down   RT screen fixings Empty Re: RT screen fixings Fri Jun 26, 2020 7:52 pm

Dai

Dai
Life time member
Life time member
£2.00 a bloody screw and I need six of them!!!!!! (Motorworks).

FRA08632
Fits K1 (09/1988 - 08/1993), K1100LT (09/1991 - 08/1999), K1100RS (09/1992... Show All...
Associated BMW part: 46632308632 (46 63 2 308 632)
RT screen fixings T
RT screen fixings Magnify_large Larger Image
Please note
This screw is prefitted with an integral plastic washer.


__________________________________________________
1983 K100 naked upgraded to K100LT spec after spending time as an RS and an RT
1987 K100RT
Others...
1978 Moto Guzzi 850-T3, 1979 Moto Guzzi 850-T3 California,1993 Moto Guzzi 1100ie California
2020 Royal Enfield Bullet 500
    

8Back to top Go down   RT screen fixings Empty Re: RT screen fixings Fri Jun 26, 2020 10:29 pm

TacKler

TacKler
Life time member
Life time member
That'll be 12 quid, sir.   Sad 

Crowd funding, perhaps?


__________________________________________________
Red 1991 K75S
    

9Back to top Go down   RT screen fixings Empty Re: RT screen fixings Sat Jun 27, 2020 5:52 am

Dai

Dai
Life time member
Life time member
Well, I had a trawl round ebay and found some lovely solid ally cup/countersunk washers. BUT! By the time I'd added protective nylon washers for underneath and a set of countersunk screws, Motorworks were beginning to look decidedly cheap.

Quote TWB: 'Whoda thunk it.'


__________________________________________________
1983 K100 naked upgraded to K100LT spec after spending time as an RS and an RT
1987 K100RT
Others...
1978 Moto Guzzi 850-T3, 1979 Moto Guzzi 850-T3 California,1993 Moto Guzzi 1100ie California
2020 Royal Enfield Bullet 500
    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum