BMW K bikes (Bricks)

You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Repair Hi/Lo beam switch Empty Repair Hi/Lo beam switch on Thu Oct 22, 2020 4:08 pm

waneill

waneill
New member
New member
Another way to repair the Hi/Lo switch after taking it apart is to use a dremmel like tool to carefully grind out the plastic housing around all of the electrical contacts.  Harbor Freight sells a Dremmel like took for a little over $10 that comes with many small cutting tools.  One of these tools is a small bur about 3 mm in diameter.  This tool works well to grind the switch housing.  I found that grinding about 0.010 inches or 1/4 mm works well.  This method avoids melting the plastic and pushing the contacts in further.

I live in Montclair, CA and would be happy to assist anyone repair their switch.

    

2Back to top Go down   Repair Hi/Lo beam switch Empty Re: Repair Hi/Lo beam switch on Fri Oct 23, 2020 4:56 am

Arlina

Arlina
Moderator
Moderator
Dropped this post in the right section for you Cool


__________________________________________________
Repair Hi/Lo beam switch Eu-log10  K1100RS/LT - R1200RT - R1100RS (RIP) - Cagiva SST 350 Ala Verde - K75LT project
    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum