BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


Shibbolet

Shibbolet
New member
New member
Hi all guys, sorry for bother you with a classical theme:D

After weeks spent studying the electric scheme of my k1100rs I have wired a bep 3.0 (I hope it is wired in the proper way, the original connectors were missing and I have to rewire everything). The best goal for me is that now the engine stop when I put off the key, When I bought the bike it stay on also without the key:x.

Anyway, my little problem now is about the settings of the acewell. After time and date I have this option, and I'm not sure how to set it, the original booklet it's not helpful for me.

PS: I wired the original speedo sensor, I do not have the aftermarket one with magnets.

What are the correct settings in this fields? 

Setting for acewell 2853 wired with bep 3.0 IMG-4353

Setting for acewell 2853 wired with bep 3.0 IMG-4354

Setting for acewell 2853 wired with bep 3.0 IMG-4355

Setting for acewell 2853 wired with bep 3.0 IMG-4356

Thanks to everyone can help me!

    

robmack

robmack
Life time member
Life time member
here is my take on these settings.

first pic: r01000 should be r06800
second pic: SP should be SPC 1.0
third pic: c357 should be c2000 but you'll have to play with this number to get an accurate reading of the speedometer at all speeds
fourth pic: p06 is correct


__________________________________________________
Robert
1987 K75 @k75retro.blogspot.ca
http://k75retro.blogspot.ca/
    

Shibbolet

Shibbolet
New member
New member
Tnx robmack!

    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum