BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


Wiz

Wiz
Silver member
Silver member
Hi, I have some extra parts and what not laying around from my current k100 build that I am trying to get rid of, parts include:
Unless otherwise specified all parts work as of removal from bike. I mostly want this stuff out of my hair, so throw me an offer, I am not trying to get top dollar out of this stuff.

Air flow meter W Rubber Intake tube (airbox somewhat damaged)

Set of coils (old style iirc, kinda grubby)

Most of the relays (let me know what you need)

Fuel injection control unit (dirty but working)

Ignition Box (dirty but working)

BEP 3.0 (basically new, hardly used) sold

Lunchbox (missing some bulbs I think, but worked when I removed it, not sure now as I had it open to fix tac, soldered a broken connector) US model

Most of the wiring harness, though it has some bits missing.

Fuel tank, has a pinhole in the bottom left under the fuel pump. Paint long since gone, covered in white spray-paint for now, several dents, no internals (throw me an offer, I just want it gone, if you are in the ca bay area even better) - Sold

Fuel cap and key (if I can find it) - Sold

I believe I still have the old seat and rear end from the bike, but its grey and the comfort style seat from the later model bikes, also should have the mounting hardware for it.

Oddly enough, I also believe I have a side stand switch from a k1200. 

If you are interested in any of these parts or potentially anything else I might have forgotten to include, send me a message and I will see if I have it, I can send pictures of the items if interested.


Various Bits and pieces of a 1987 k100LT for sale 11212010

Thanks,

Wiz



Last edited by Wiz on Sun Aug 22, 2021 2:05 pm; edited 3 times in total

    

Dan Pete

Dan Pete
Silver member
Silver member
I’m interested in the tank, and don’t mind repairs. Also the cap, and don’t mind if you didn’t find a key! If they are still around, we’ll need to work out shipping to al, and see if it’s worth it. Thanks. DJP

    

Wiz

Wiz
Silver member
Silver member
Dan Pete wrote:I’m interested in the tank, and don’t mind repairs. Also the cap, and don’t mind if you didn’t find a key! If they are still around, we’ll need to work out shipping to al, and see if it’s worth it. Thanks. DJP
I sent you a PM, are you still interested?

Thanks, Wiz

    

Dan Pete

Dan Pete
Silver member
Silver member
Finally saw them. Good pictures; looking forward to working it out, unless shipping is crazy. Shouldn’t be bad, since you can legitimately call it “body pieces”.

    

Dan Pete

Dan Pete
Silver member
Silver member
Tank got delivered today. Was a pleasure doing business with the Wiz!
The "parts bike" might get to be a real BIKE one day Shocked


__________________________________________________
1987 K75S Red (metallic) (575) Vin 0150375 (6/19/86) Bought 05/2021 with 53K miles.
1988 K75S Marrakesh Red (643) Vin 0151479 (08/14/1987) Bought 05/2005 with 14,500 miles. Rode till 2009 at 35Kmiles. Stored in poor shape since. Sad
1993 K1100RS Mystic Red    Parts Bike. Seems mostly complete, apparently only 9100 miles!
    

Dan Pete

Dan Pete
Silver member
Silver member
Various Bits and pieces of a 1987 k100LT for sale WWr73BzTo7X6QAAAABJRU5ErkJggg==
Lot of elbow grease left, to bring this one back... Where can I get some of that stuff cheap? I ran out a couple years ago...


__________________________________________________
1987 K75S Red (metallic) (575) Vin 0150375 (6/19/86) Bought 05/2021 with 53K miles.
1988 K75S Marrakesh Red (643) Vin 0151479 (08/14/1987) Bought 05/2005 with 14,500 miles. Rode till 2009 at 35Kmiles. Stored in poor shape since. Sad
1993 K1100RS Mystic Red    Parts Bike. Seems mostly complete, apparently only 9100 miles!
    

JamesU

JamesU
active member
active member
Hi, I’m interested in the BEP 3.0 if you still have it.

    

Wiz

Wiz
Silver member
Silver member
I do indeed still have the BEP 3.0, how does 120 sound?

    

JamesU

JamesU
active member
active member
Wiz wrote:I do indeed still have the BEP 3.0, how does 120 sound?
That works. What brand is this BEP 3.0? Where are you located?

    

Wiz

Wiz
Silver member
Silver member
The unit was purchased from cafe4racer.eu I think, part of a larger order. Not sure who made it though but it is a Maru labs BEP 3.0

    

JamesU

JamesU
active member
active member
Wiz wrote:The unit was purchased from cafe4racer.eu I think, part of a larger order. Not sure who made it though but it is a Maru labs BEP 3.0
Ok sounds good. If it all works I’m in. Can you do $120 including the shipping if it’s not too much? I’m located in New Hampshire 03225.

    

Wiz

Wiz
Silver member
Silver member
When I get home from work I will calculate shipping and get back to you on that, I don't expect shipping to cost much though, it is small and light.

    

rounders

rounders
New member
New member
It looks like I may be too late, but I am interested in the BEP if it didn't sell. Thanks. 

    

Wiz

Wiz
Silver member
Silver member
rounders wrote:It looks like I may be too late, but I am interested in the BEP if it didn't sell. Thanks. 
Already sold, sorry about that.

    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum