BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Regrinding a crankshaft. Empty Regrinding a crankshaft. Sat Jul 30, 2022 6:51 am

UnipowerGT

UnipowerGT
active member
active member
Are oversize Main bearings available?

I can only find 1/100mm oversizes mentioned, but I need 1/2mm.

    

2Back to top Go down   Regrinding a crankshaft. Empty Re: Regrinding a crankshaft. Sat Jul 30, 2022 6:55 am

Dai

Dai
Life time member
Life time member
Check the cost of a regrind - it might very well be only slightly more expensive to find a complete engine.

Edt: Just spotted your location. Motorworks will sell you a good engine for around £450. Check their website.


__________________________________________________
1983 K100 naked upgraded to K100LT spec after spending time as an RS and an RT
1987 K100RT
Others...
1978 Moto Guzzi 850-T3, 1979 Moto Guzzi 850-T3 California,1993 Moto Guzzi 1100ie California
2020 Royal Enfield Bullet 500
    

3Back to top Go down   Regrinding a crankshaft. Empty Re: Regrinding a crankshaft. Sat Jul 30, 2022 7:35 am

Rick G

Rick G
admin
admin
You wont get oversize bearing shells and don't grind a K100 crank they have chrome journals.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

4Back to top Go down   Regrinding a crankshaft. Empty Re: Regrinding a crankshaft. Thu Aug 04, 2022 5:22 pm

UnipowerGT

UnipowerGT
active member
active member
Dai wrote:Check the cost of a regrind - it might very well be only slightly more expensive to find a complete engine.

Edt: Just spotted your location. Motorworks will sell you a good engine for around £450. Check their website.

Dear Dai,

Thank you for your kind reply.

I don't actually need an engine.  I have acquired these boxes of parts, and putting them back together will keep me out of mischief.

Thomas.

    

5Back to top Go down   Regrinding a crankshaft. Empty Re: Regrinding a crankshaft. Fri Aug 05, 2022 2:15 pm

Dai

Dai
Life time member
Life time member
UnipowerGT wrote:I have acquired these boxes of parts, and putting them back together will keep me out of mischief.
More like get you into mischief Twisted Evil

-Dai


__________________________________________________
1983 K100 naked upgraded to K100LT spec after spending time as an RS and an RT
1987 K100RT
Others...
1978 Moto Guzzi 850-T3, 1979 Moto Guzzi 850-T3 California,1993 Moto Guzzi 1100ie California
2020 Royal Enfield Bullet 500
    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum