BMW K bikes (Bricks)


You are not connected. Please login or register

K100-forum.com » Technical, repair and troubleshooting » Electrical » Identifying connectors K100 & posiioning wires

View previous topic View next topic Go down  Message [Page 1 of 1]

jjefferies

jjefferies
Life time member
Life time member
Hello all. ?Blue '86 K100,
Now that I've got the throttle cable installed, maybe, hoping, it's time to move on to the various under the tank wires. Are there any lists of the various wires, their connector's for identifiction, and where they are positioned/placed?

Thanks
J.

    

robmack

robmack
Life time member
Life time member
There is a picture of where a connector is under the tank, which answers 1/3 of your ask
Identifying connectors K100 & posiioning wires Under-tank-wiring


__________________________________________________
Robert
1987 K75 @k75retro.blogspot.ca
http://k75retro.blogspot.ca/
    

Dai

Dai
Life time member
Life time member
Another one-third is that most of the connectors are polarised so will only connect to their partner. Until you come to the clutch, front brake, rear brake and fast idle which are all yellow because it's the same physical switch type...


__________________________________________________
1983 K100 naked upgraded to K100LT spec after spending time as an RS and an RT
1987 K100RT
Others...
1978 Moto Guzzi 850-T3, 1979 Moto Guzzi 850-T3 California,1993 Moto Guzzi 1100ie California
2020 Royal Enfield Bullet 500
    

duck

duck
Life time member
Life time member
robmack wrote:There is a picture of where a connector is under the tank, which answers 1/3 of your ask
Identifying connectors K100 & posiioning wires Under-tank-wiring


What's "5-Starter switch" in that diagram?


__________________________________________________
Current stable:
86 Custom K100 (standard fairing, K75 Belly pan, Ceramic chromed engine covers, paralever)
K75 Frankenbrick (Paralever, K11 front end, hybrid ABS, K1100RS fairing, radial tires)
86 K75C Turbo w/ paralever
94 K1100RS
93 K1100LT
91 K1
93 K75S (K11 front end)
91 K75S (K1 front end)
14 Yamaha WR250R
98 Taxi Cab K1200RS
14 K1600GT
http://www.ClassicKBikes.com
    

duck

duck
Life time member
Life time member
Dai wrote:Another one-third is that most of the connectors are polarised so will only connect to their partner. Until you come to the clutch, front brake, rear brake and fast idle which are all yellow because it's the same physical switch type...

Clutch switch - BLK/GRN & GRN/BLK
Front brake - GRA/RED & GRN/BLK
Rear brake - GRA/GRN & GRN/BLK
Choke(fast idle) - VIO/WHT & Brown


__________________________________________________
Current stable:
86 Custom K100 (standard fairing, K75 Belly pan, Ceramic chromed engine covers, paralever)
K75 Frankenbrick (Paralever, K11 front end, hybrid ABS, K1100RS fairing, radial tires)
86 K75C Turbo w/ paralever
94 K1100RS
93 K1100LT
91 K1
93 K75S (K11 front end)
91 K75S (K1 front end)
14 Yamaha WR250R
98 Taxi Cab K1200RS
14 K1600GT
http://www.ClassicKBikes.com
    

jjefferies

jjefferies
Life time member
Life time member
Thanks for the info.
J.

    

7Back to top Go down   Identifying connectors K100 & posiioning wires Empty Wiring Sat Nov 05, 2022 6:10 pm

daveyson

daveyson
Life time member
Life time member
Number 5 is the plug for the ignition key switch, the plug beside it that joins the loom with 4, is for the flasher cancel button. The drawing puts the flasher cancel at plug 1, so I think that's a typo.


__________________________________________________
11/1985 bmw k100rt (late model)  Vin. 0090567
 ~120,000 km
    

robmack

robmack
Life time member
Life time member
The picture isn't wrong. The orientation is strange. The front of the motorcycle frame is at the bottom of the picture, the relay box at the top, the right side of the motorcycle on the left and visa versa for the left side.


__________________________________________________
Robert
1987 K75 @k75retro.blogspot.ca
http://k75retro.blogspot.ca/
    

9Back to top Go down   Identifying connectors K100 & posiioning wires Empty Wiring Sun Nov 06, 2022 12:06 am

daveyson

daveyson
Life time member
Life time member
True the drawing is correct and tricky with the front at the bottom, I think it's just labeled wrong with plug number 1, they put it at the front, but actually the flasher cancel plug is between plug number 4 and 5.


__________________________________________________
11/1985 bmw k100rt (late model)  Vin. 0090567
 ~120,000 km
    

robmack

robmack
Life time member
Life time member
You're right about the turn signal cancel connector being near "4". Odd that they have drawn a dangling plug near "4" but not labelled it with "1" because that is exactly what the connector looks like.


__________________________________________________
Robert
1987 K75 @k75retro.blogspot.ca
http://k75retro.blogspot.ca/
    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

K100-forum.com » Technical, repair and troubleshooting » Electrical » Identifying connectors K100 & posiioning wires

Permissions in this forum:
You cannot reply to topics in this forum