BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Hybrid Project in Colorado Empty Hybrid Project in Colorado Sat Jun 29, 2024 11:29 pm

deucydeuce

deucydeuce
New member
New member
Hello all, I've come across this forum a time or two so decided to join and say hi.  Currently have an 85 K100 project and a good running 93 K1100.  The K100 was picked up as a non runner with an oil leak.  Got her running and have decided to a full custom rebuild.  Currently working on swapping an R1200C swing arm and final drive before doing frame work and engine rebuild.  I know there are some purists that won't appreciate the work, but I'll do my best to post some pictures for those that do.  Cheers, and thanks for the help in the past.  

https://servimg.com/view/20570712/7

https://i.servimg.com/u/f63/20/57/07/12/img_5817.jpg

    

2Back to top Go down   Hybrid Project in Colorado Empty Re: Hybrid Project in Colorado Sun Jun 30, 2024 8:10 am

Dai

Dai
Life time member
Life time member
Hybrid Project in Colorado 177912


__________________________________________________
1983 K100 naked upgraded to K100LT spec after spending time as an RS and an RT
1987 K100RT
Others...
1978 Moto Guzzi 850-T3, 1979 Moto Guzzi 850-T3 California,1993 Moto Guzzi 1100ie California
2020 Royal Enfield Bullet 500
    

3Back to top Go down   Hybrid Project in Colorado Empty Re: Hybrid Project in Colorado Sun Jun 30, 2024 8:54 am

jbt

jbt
Life time member
Life time member
I used to consider this solution before...
How is the rear wheel aligment with the front?



Last edited by jbt on Sun Jun 30, 2024 2:38 pm; edited 1 time in total


__________________________________________________
Let us enjoy the transient delight
That fills our fairest day.
    

4Back to top Go down   Hybrid Project in Colorado Empty Re: Hybrid Project in Colorado Sun Jun 30, 2024 11:22 am

bad boy

bad boy
Life time member
Life time member
hello deucydeuce
Hybrid Project in Colorado 177912


__________________________________________________
Cheerz, David

Hybrid Project in Colorado 9438-010

____________________________________________________________________________
1997 Peraves Super Ecomobile: a Kevlar reinforced monocoque with outrigger wheels, seating two.
K100 fork, monolever, headlight, indicators, K1100RS gearbox and K1200RS 589 engine, rear wheel
    

5Back to top Go down   Hybrid Project in Colorado Empty Re: Hybrid Project in Colorado Sun Jun 30, 2024 2:38 pm

deucydeuce

deucydeuce
New member
New member
jbt wrote:I usé to consider this solution before.
.How is the rear wheel aligment with the front?
The rear is off center by about 5mm, I'm planning on adding a spacer.  The real hurdle is the u-joint, I'm swapping the flange yoke from the K100 over to the driveshaft of the 1200 but they use different size u-joints.  Think I found a solution, but won't know for sure until it arrives.

    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum