BMW K bikes (Bricks)

You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   BETOR shock. Empty BETOR shock. Wed Jul 27, 2011 11:58 am

martin@swad

avatar
active member
active member
Just got my LT on the road but found I've got no damping on the BETOR monoshock. It did have some air in it when I checked, so it's obviously capable of holding pressure. My problem is the bike did not come with the adaptor required to couple to a pump. Has anybody got one I can borrow or buy. Also what sort of pressure should have.



Martin

    

2Back to top Go down   BETOR shock. Empty Re: BETOR shock. Thu Jul 28, 2011 2:00 am

K-BIKE

avatar
Life time member
Life time member
You could try asking these guys http://www.sammymillerproducts.co.uk/betor_shocks.html
Regards,
K-BIKE

    

3Back to top Go down   BETOR shock. Empty Re: BETOR shock. Thu Jul 28, 2011 12:22 pm

martin@swad

avatar
active member
active member
Thanks for that, will give them a try tomorrow.

Martin

    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum