BMW K bikes (Bricks)

You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


GuitarMan

avatar
New member
New member
Hi Guys,

I've fitted a fuel gauge to my 1984 K100RS and it works to the extent it goes all the way up as soon as bike is turned on and stays there, ie it is getting 12v.

AFAIK my bike doesn't have the Fuel Level Sender inside the tank, can these be retro-fitted, or do I need a newer tank?

And if I'm wrong Laughing and it has one already fitted, how (and where from/to) is it wired to the fuel gauge?

Thanks

Steve

http://www.myspace.com/stevelockheart
    

Stan

Stan
Life time member
Life time member
Welcome GuitarMan. There are two types of tanks, it sounds like you have an early one, like mine. To be sure whether it is the old style the underneath left side front tank will have a sender unit fitted. If it has a large hex looking black nut and a small electrical plug then you have an early tank. As far as I know the sender unit can not be used for a fuel gauge.


__________________________________________________
1983 K100 basic vin 0003960 colour red  GONE
1987 K100RT vin 0094685 colour, orange peel, sorry, pearl..GONE
F800R black
    

GuitarMan

avatar
New member
New member
Thanks Ainsjac .... well, it looks like I'll be selling that gauge then!

http://www.myspace.com/stevelockheart
    

Stan

Stan
Life time member
Life time member
Not a problem at all. Good luck.


__________________________________________________
1983 K100 basic vin 0003960 colour red  GONE
1987 K100RT vin 0094685 colour, orange peel, sorry, pearl..GONE
F800R black
    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum