BMW K bikes (Bricks)

You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


pants5270

avatar
active member
active member
Hello, I have a 1985 K100RT that until yesterday ran very well. Not being one to leave well enough alone, I decided to install a new battery to face the long cold winter ahead. Naturally,after this procedure, she refuses to operate. The starter motor will rotate the engine without internal combustion, and I have verified ignition spark and fuel delivery, but there is no voltage present at the fuel injectors. The wiring harness connection at the FI ECU appears clean and robust. The spark plugs show normal deposits and are totally dry. I have'nt the foggiest idea how to procede from here! Any help appreciated.

    

K-BIKE

avatar
Life time member
Life time member
Recheck everything you removed when you put the battery in. Chance are you left something disconnected.
Regards,
K-BIKE

    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum