BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   k100 wiring  Empty k100 wiring Thu Oct 15, 2015 1:14 pm

TheJoker

TheJoker
Silver member
Silver member
Hello I'm doing a new loom for my k100rs and I was wondering if anyone could give me some information on the type of wire to be using. So far I'm doing the tail light, FICU (brain box under the seat) some wires have been cut.

Now as I lost the whole rear end I've lost that part of the wiring and can't really see how it all goes I work best on images than diagrams so if anyone has any pictures it would be a great help.


__________________________________________________
My Bike List past to present so far;

Lexmoto (first bike ever to ride) , CB125 TDC 86 , CG125 89 , GN125 97 , ER5 96 , K100 RS 84

84/01 K100rs 0013627
    

2Back to top Go down   k100 wiring  Empty Re: k100 wiring Thu Oct 15, 2015 3:53 pm

Dai

Dai
Life time member
Life time member
http://www.vehicle-wiring-products.eu/section.php/198/1/single-core-pvc-thin-wall-cable

16/0.2 and 32/0.2. It's a shame you can't get tracers in 16/0.2 because 11amp wiring is adequate for most jobs. If you can wait a day or two, my next section to-do on Brick2 is the ar$e. This thread here, if you haven't been following it:

https://www.k100-forum.com/t10428-comberjohn-s-ghost#123405


__________________________________________________
1983 K100 naked upgraded to K100LT spec after spending time as an RS and an RT
1987 K100RT
Others...
1978 Moto Guzzi 850-T3, 1979 Moto Guzzi 850-T3 California,1993 Moto Guzzi 1100ie California
2020 Royal Enfield Bullet 500
    

3Back to top Go down   k100 wiring  Empty Re: k100 wiring Thu Oct 15, 2015 4:10 pm

TheJoker

TheJoker
Silver member
Silver member
Dai wrote:http://www.vehicle-wiring-products.eu/section.php/198/1/single-core-pvc-thin-wall-cable

16/0.2 and 32/0.2. It's a shame you can't get tracers in 16/0.2 because 11amp wiring is adequate for most jobs. If you can wait a day or two, my next section to-do on Brick2 is the ar$e. This thread here, if you haven't been following it:

https://www.k100-forum.com/t10428-comberjohn-s-ghost#123405

Thank you for the link this will be my first time at reproducing the wiring (any wiring) so a little bit anxious and nervous about starting it. However after finding the wires cut in the brain box and the whole tail piece had gone I've got to learn somewhere.

Unfortunately I haven't been on that much recently. I've mainly been using the k75/k100 facebook owners group. Just because it was easier to post saves created a load of threads for some silly questions. Haven't even really updated the thread on here either although that was in the wrong section.

So that means I haven't really been looking into many threads. I don't mind waiting I've still yet to get the seat sorted out on the Frankensmiler (Bibo's new name). Here is an updated image of both of my bikes below; bad quality image I'm sorry.

k100 wiring  4kuMgFw


EDIT:



Last edited by TheJoker on Thu Oct 15, 2015 4:33 pm; edited 1 time in total (Reason for editing : To be honest I still haven't even got any tools to do the wiring yet.)


__________________________________________________
My Bike List past to present so far;

Lexmoto (first bike ever to ride) , CB125 TDC 86 , CG125 89 , GN125 97 , ER5 96 , K100 RS 84

84/01 K100rs 0013627
    

4Back to top Go down   k100 wiring  Empty Re: k100 wiring Thu Oct 15, 2015 5:47 pm

Crazy Frog

Crazy Frog
admin
admin
There is a lot of different wiring diagram on the download page.
In fact, yesterday I added the ones from Comberjhon post.
The page with the wiring brake down could be some help too: http://hrsbstaff.ednet.ns.ca/bvogel/K100/download/electrical/diagrams/interactive_diagrams.htm

CF


__________________________________________________
k100 wiring  Frog15k100 wiring  Logo2101986 k75, 1985 K100rt, 1985 K100rt/EML GT2 sidecar, 1999 K1200lt/Hannigan Astro Sport sidecar.
    

5Back to top Go down   k100 wiring  Empty Re: k100 wiring Fri Oct 16, 2015 12:45 pm

TheJoker

TheJoker
Silver member
Silver member
Thank you crazy frog I'll be using them thoroughly, I've just been going over the bike and taken some images just to give you a feeling of the wiring I've got to cope with.

Obviously you can see how bad the thieves have been, also there is another image below it's of the indicator wiring with mystery wiring to go with it, no idea what these are.

k100 wiring  Akuy1wh

k100 wiring  RKI3vXk

k100 wiring  Jk6xTyg


__________________________________________________
My Bike List past to present so far;

Lexmoto (first bike ever to ride) , CB125 TDC 86 , CG125 89 , GN125 97 , ER5 96 , K100 RS 84

84/01 K100rs 0013627
    

6Back to top Go down   k100 wiring  Empty Re: k100 wiring Tue Oct 20, 2015 2:20 pm

Dai

Dai
Life time member
Life time member
Green/black and brown wires are the heated grip feed. I'm assuming it's green/black but the tracer is not visible in the picture.


__________________________________________________
1983 K100 naked upgraded to K100LT spec after spending time as an RS and an RT
1987 K100RT
Others...
1978 Moto Guzzi 850-T3, 1979 Moto Guzzi 850-T3 California,1993 Moto Guzzi 1100ie California
2020 Royal Enfield Bullet 500
    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum