BMW K bikes (Bricks)

You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   1985 K100 drive shaft/U-Joint Empty 1985 K100 drive shaft/U-Joint Thu Jun 28, 2012 1:24 pm

rwiley111

rwiley111
active member
active member
I see this question asked but do not see the bearing number or spec/mearsurements published. I pulled the drive shaft to check and grease the Splines and found that the U-Joint is about to go. Looked up new OEM drive shaft at MAX's and currently $429.90 plus shipping and changing with upgrade to grease fitting for later service looks the way to go.

    

2Back to top Go down   1985 K100 drive shaft/U-Joint Empty Re: 1985 K100 drive shaft/U-Joint Thu Jun 28, 2012 2:16 pm

cruise_carter

cruise_carter
active member
active member
http://www.brunos.us/


lots of folks use this guy, excellent service according to my buddy whose family all rides old k bikes and have had work done


__________________________________________________
Currently on the hunt for another old K bike (K100RS would be perfect)
2004 R1200CLC (gone recently......those evo brakes are brutal)
1985 K100RT, lots of km but lots of life left (gone)
2002 HD Electra Glide Classic (gone)
1987 K100RS (gone)
2002 HD Road Glide (gone)
2000 R1100R (gone)
lots more in the past........
    

3Back to top Go down   1985 K100 drive shaft/U-Joint Empty Re: 1985 K100 drive shaft/U-Joint Thu Jun 28, 2012 9:20 pm

RicK G

RicK G
admin
admin
Bruno has a very good reputation, apparently it cost a bit to get it in and out of Canada with customs etc but is still worthwhile.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 2004 K1200GT 1998 K1100 LT, 1993 K75 RT, 1996 K75RT, 1986 K75 GS, 1979 Z1300 Kawasaki
    

4Back to top Go down   1985 K100 drive shaft/U-Joint Empty bearing Thu Jun 28, 2012 9:30 pm

rwiley111

rwiley111
active member
active member
I know about Bruno service, what I was looking for was the bearing/U-Joint replacement number so I can do it myself.

    

5Back to top Go down   1985 K100 drive shaft/U-Joint Empty Re: 1985 K100 drive shaft/U-Joint Thu Jun 28, 2012 9:45 pm

Inge K.

Inge K.
VIP
VIP
Don`t know if the 1200 the would fit................


__________________________________________________
Inge K.
K100RS -86. (first owner), K1100LTSE -94.
    

6Back to top Go down   1985 K100 drive shaft/U-Joint Empty Re: 1985 K100 drive shaft/U-Joint Thu Jun 28, 2012 9:56 pm

RicK G

RicK G
admin
admin
It should fit as Bruce does an exchange drive shaft as well and it says K2/K4.
Munich in Perth west Oz are good to deal with but a bit expensive at times.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 2004 K1200GT 1998 K1100 LT, 1993 K75 RT, 1996 K75RT, 1986 K75 GS, 1979 Z1300 Kawasaki
    

7Back to top Go down   1985 K100 drive shaft/U-Joint Empty Re: 1985 K100 drive shaft/U-Joint Thu Jun 28, 2012 10:55 pm

cruise_carter

cruise_carter
active member
active member
@rwiley111 wrote:I know about Bruno service, what I was looking for was the bearing/U-Joint replacement number so I can do it myself.

sorry, missed this in your original post, thought you were looking for a driveshaft.....

maybe Bruno might be nice enough to give you the numbers if you contacted him


__________________________________________________
Currently on the hunt for another old K bike (K100RS would be perfect)
2004 R1200CLC (gone recently......those evo brakes are brutal)
1985 K100RT, lots of km but lots of life left (gone)
2002 HD Electra Glide Classic (gone)
1987 K100RS (gone)
2002 HD Road Glide (gone)
2000 R1100R (gone)
lots more in the past........
    

8Back to top Go down   1985 K100 drive shaft/U-Joint Empty Thank You Fri Jun 29, 2012 2:34 pm

rwiley111

rwiley111
active member
active member
Inge K., Thank you for the information and Munich Motorcycles in Perth carries the bearing. The part number for a replacement bearing or upgrade must be like a International Guarded Secret, should be able to have the number and go to a bearing house and pick it up, when I take mine apart I will measure and find the information and post them.

    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum