BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Handlebar clamp bolt spacing Empty Handlebar clamp bolt spacing Tue Oct 02, 2012 4:20 am

shack

shack
active member
active member
Hi all, I plonked this at the bottom of another posrt, and think it might get lost along the way, so I've cut and pasted it on a new one and voila!(some of the info about the links were tied in with the original riser post)

Can I ask a newbie/ numpty question, are the bolt spacings standard across different makes, I've found some that move the bars up 30mm and back 22mm but didn't specify any make (that they fit)

http://www.ooracing.com/store/index.php?act=viewProd&productId=2878



I've emailed the company so it depends if they can be bothered/ are able to get the tape measure out!

I emailed the cycle link listed above, but they haven't replied to either of my emails, so lost confidence in them, and the red luna weren't happy to say if it would fit the RS and to check with a dealer (they did reply which was nice)

Ta muchly

    

2Back to top Go down   Handlebar clamp bolt spacing Empty Re: Handlebar clamp bolt spacing Tue Oct 02, 2012 4:44 am

Rick G

Rick G
admin
admin
AFAIK right up the end of the K1100 they were the same. I do know the R80RT I had is the same as the K75/100/1100.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum